MFR1WSJB-52-68K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are some of the most common types of resistors used in printed circuit board (PCB) designs. They are typically constructed from a copper or aluminum wire attached to a ceramic body and then soldered to a PCB. The MFR1WSJB-52-68K is one type of through hole resistor that is often used in low-power applications. This article will discuss the application field of these resistors and their working principle.

Application Fields of MFR1WSJB-52-68K:

The MFR1WSJB-52-68K through hole resistor is a popular choice for low power applications due to its small size and low cost. These resistors are typically used in applications where a small amount of current needs to be controlled. They are commonly used in signal conditioning circuits, off-board signals, over-voltage protection circuits, and for voltage attenuation. They are also used in audio circuits, where they help to reduce noise or signal distortion. Additionally, they are used in power supplies to provide current regulation.

Working Principle of MFR1WSJB-52-68K:

The MFR1WSJB-52-68K resistor is an electrical component that is used to reduce the flow of current in a circuit. It functions by converting electrical energy to heat energy, thus limiting the amount of current that can flow through the circuit. This process is known as electrical resistance and is accomplished through the resistance of the material that the resistor is constructed from. The MFR1WSJB-52-68K resistor is typically rated to handle up to 68 Kilo Ohms or 68Kohm of electrical resistance. This means that it can reduce the current flow in the circuit by up to 68Kohm.

The MFR1WSJB-52-68K resistor works by creating a small amount of electrical resistance in the circuit. When current passes through the resistor, it is forced to travel at a slower speed. This reduction in speed allows the current to dissipate as heat energy, reducing the amount of current that is able to flow through the circuit. The amount of electricity that is able to flow through the resistor is determined by the resistance of the material that it is constructed from. The higher the resistance of the material, the lower the amount of current that can travel through the resistor.

MFR1WSJB-52-68K resistors are commonly used in low-power applications due to their small size and low cost. In addition to their use in signal conditioning and power regulation circuits, they are also used for over-voltage protection. By limiting the amount of current that can flow through the circuit, the MFR1WSJB-52-68K resistor provides protection against electrical overloads. Additionally, they are used in audio circuits to reduce noise or signal distortion.

Conclusion:

The MFR1WSJB-52-68K through hole resistor is a type of resistor used for low-power applications. It is constructed from a copper or aluminum wire attached to a ceramic body and then soldered to a PCB. These resistors function by creating a small amount of electrical resistance in the circuit, limiting the amount of current that can travel through the resistor. They are commonly used in signal conditioning circuits, off-board signals, over-voltage protection circuits, and for voltage attenuation. The MFR1WSJB-52-68K resistor is a popular choice for low-power applications due to its small size and low cost.

The specific data is subject to PDF, and the above content is for reference