MFR25SFTE52-698K

Series:	MFR
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	698 kOhms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.075" Dia x 0.134" L (1.90mm x 3.40mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors have been integral components in electrical systems since the early days of electronics. They are used to control the amount of current that flows through circuitry, providing a range of voltage levels to be applied to a system. The MFR25SFTE52-698K is a Through Hole Resistor, commonly used in amplifiers and other audio systems. This type of resistor has a wide range of applications and is available with various power ratings, resistances, and tolerances.

The MFR25SFTE52-698K is a four terminal resistor, hence the designation “MFR”, which stands for “Multi-Function Resistor”. The four terminals can be used to configure the resistor in a series or parallel combination to meet a wide range of applications requiring different resistance levels. The terminals are all spade and solder connections, allowing for easy attachment to wiring or components.

The MFR25SFTE52-698K has a power rating of 25 watts, and is available in a range of resistance values from 5.6 ohms up to 55 ohms. It also has a tolerance of ±5%, meaning that the actual reading may vary by as much as 5%. The datasheet of the component should be consulted for the exact resistance value and power rating for the specific application.

The MFR25SFTE52-698K has been designed for use in audio systems, primarily in power amplifiers. The resistance value of the resistor can be configured to either increase or decrease the amount of current flowing through the circuits, providing a range of different voltage levels depending on the desired effect. The resistor can also be used to balance levels between different components in a system, such as in a crossover circuit.

The working principle of the MFR25SFTE52-698K is based on the resistance of the metal material chosen for the resistor. When a voltage is applied to the resistor, the current coming through is limited by the resistance of the metal material. Depending on the resistance value chosen for the MFR25SFTE52-698K, the current will be limited and the voltage across the resistor will be reduced correspondingly. The resistor is thus used to control the amount of current flowing through a system, and to provide different voltage levels for different applications.

As with all Through Hole Resistors, the MFR25SFTE52-698K needs to be correctly rated for the application it is being used in. Care must also be taken to ensure that the terminals are securely attached and correctly insulated. It is important to be aware of the potential for electrical shocks when working with any type of resistor, and to ensure that all safety precautions are taken.

The MFR25SFTE52-698K is a popular Through Hole Resistor, and can be found in a wide range of audio systems. Its four-terminal design allows it to be easily configured for different channels and power ratings while providing consistent levels of low noise performance. With its wide range of resistance options and tolerances, the MFR25SFTE52-698K is an ideal choice for audio system applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description