MFR25SFTF52-16R5

Series:	MFR
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	16.5 Ohms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.075" Dia x 0.134" L (1.90mm x 3.40mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are a type of resistor used for electronic circuits. They are manufactured by drilling holes into a printed circuit board, or PCB, and then inserting a metal conductor such as a copper trace, copper plate, or foil inside the hole. The resistor is then soldered onto the board. This type of resistor has many advantages over other types of resistors, including its ability to handle high levels of current with minimal voltage drop, their small size, and their low cost.The MFR25SFTF52-16R5 is one of the many types of through hole resistors that can be found in the market. This resistor is a type of resistor that is able to handle higher current load and minimize power loss. It is ideal for applications where high current and power is needed but low voltage drop is desired. It is also more economical than other types of through hole resistors in terms of cost.The MFR25SFTF52-16R5 is composed of three main parts: the body, the terminals, and the wire. The body is made of a ceramic material that helps to dissipate heat. It also contains the electrolytic capacitor which provides a high level of insulation. The terminals are designed to keep the wires securely fastened to the body and the solder points. The contacts also enable to connect to other parts of the circuit, allowing the resistor to complete the circuit. Finally, the wire is enclosed in an insulator so that the high currents it carries do not cause it to short-circuit.The working principle of the MFR25SFTF52-16R5 is fairly simple. When a current is passed through the resistor, its resistance to the current causes the voltage to decrease as the current passes through it. This results in a decrease in the current. The electricity dissipates in the form of heat which is then dissipated by the ceramic body. The ceramic body also helps the resistor to handle higher current without getting too hot, making it ideal for applications with high current requirements.The MFR25SFTF52-16R5 has many applications. It can be used as a voltage-divider, limiting resistor, current-limiter, or even as a noise filter. It can also be used in applications like motor control systems, power amplifiers, and industrial electrical systems.In conclusion, the MFR25SFTF52-16R5 is a type of through hole resistor. It is composed of a ceramic body, terminals, and a wire. This resistor has many advantages over other types of resistors, as it can handle high current and minimize voltage drops. Its applications range from motor control systems to noise filters. It is a great choice for any circuit that requires a strong and reliable resistor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description