MFR50SDBE52-16R4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are very common elements of electrical systems that wear out over time and require replacement. The MFR50SDBE52-16R4 is a single-turn through-hole resistor that can be used in various applications. It has a lead spacing of 5.08 mm, a rated power of 5W which are features that provide added convenience when replacing through hole resistors.

The MFR50SDBE52-16R4 through hole resistor is an ideal choice for several applications due to its stability, convenience and cost-effectiveness. It is mostly deployed in the following applications: automotive, telecom, power distribution, high-frequency switch-mode power supplies, current-control circuits. It is also very popular for use in low level audio circuits.

The lead spacing of the MFR50SDBE52-16R4 is further narrowed down to 0.2", which is very compact for a 5W resistor. This allows its mounting to be neat and non-intrusive. It is also durable due to the use of high-grade insulation materials that help reduce the chance of spark damage and ensure excellent electrical performance.

The MFR50SDBE52-16R4 utilizes a through-hole construction technique, which is well-suited for high power applications. The through-hole solder pins provide mechanical resilience when dealing with large mechanical loads. This also reinforces the electrical connection between the resistor and circuit board, ensuring strong electrical continuity.

The MFR50SDBE52-16R4 resistor\'s operating temperature ranges between -55 to +155 Celsius. This temperature range makes it highly reliable and more resistant to vibration and stress. With a very generous operating temperature, it can be used in a wide variety of environments, including extreme cold or hot temperatures.

The working principle of the MFR50SDBE52-16R4 resistors is based on Ohm\'s law which states that the current flowing through a resistor is proportional to the applied voltage. The resistor\'s resistance value is calculated by dividing the applied voltage by the current flow. The resistor absorbs the voltage difference thus limiting the current flow. At the same time, the current flow can also be limited by adjusting the resistance value.

The MFR50SDBE52-16R4 through-hole resistor can be used as a voltage divider, current-limiting resistor or a signal-generating resistor. It is an efficient and cost-effective resistor and can be used in many different applications. It is a great choice for any application requiring a through-hole resistor because of its compact size and long-term reliability.

The specific data is subject to PDF, and the above content is for reference