MFR50SDBE52-2K21

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors, such as the MFR50SDBE52-2K21, are one of the earliest types of resistors used in electronics, dating back as far as the 1950s. In its most basic form, a through-hole resistor consists of a ceramic core covered in a resistance material such as mica, metal, or paper. This core is then encased in an outer housing, usually made of plastic or metal, which also serves to protect the resistor from the environment. Due to their simple construction, through-hole resistors offer excellent reliability, relatively low cost, and are easy to manufacture.

The MFR50SDBE52-2K21 is a standard through-hole resistor. It has an a ceramic core encased in a rugged, heat-resistant polyvinylchloride (PVC). The core is covered with a resistive material such as mica, paper, or metal which determines its resistive value. The resistor is also designed with a pressure-fit terminal that allows it to be soldered to a printed circuit board (PCB) using standard through-hole soldering techniques.

The MFR50SDBE52-2K21 has a resistance value of 2K Ohms and can handle power up to 500mW. It is a standard axial lead component, meaning the component consists of two leads which must be soldered to two holes in the PCB. It can operate over a temperature range from -55 to +155°C and has a voltage rating of 50V. The resistor is also RoHS complaint, meaning it does not contain lead or other hazardous substances.

The MFR50SDBE52-2K21 typically finds applications in home audio and video equipment, telecommunication devices, and automotive applications. It can be used for power resistors or as a simple voltage divider. The resistor also finds use in circuit designs where high-stability and low noise are required.

Through-hole resistors, such as the MFR50SDBE52-2K21, depend on the flow of electrons through the resistive material. At the microscopic level, current flow is impeded by the material’s resistance and generates heat. The greater the resistance, the more heat is generated. Resistance also contributes to accuracy, as variations in resistive material can lead to inaccuracies in the circuit. However, with the MFR50SDBE52-2K21 and other through-hole resistors, these worries are eliminated thanks to the precision of the resistive material and its construction.

Through-hole resistors are reliable components with excellent repeatable performance, allowing them to routinely and accurately complete circuits. The MFR50SDBE52-2K21 is a standard axial lead through-hole resistor that meets industry standards and is well suited for a variety of applications. With its heat-resistant housing, high tolerance, and low power consumption, the MFR50SDBE52-2K21 is an ideal component for home audio and video equipment, telecommunication devices, and automotive applications.

The specific data is subject to PDF, and the above content is for reference