MFR50SDRD52-2K08

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors, otherwise known as through-hole components, are components designed to be inserted into a printed circuit board pitch hole, typically with a pin on each end. These resistors are often used in the same way as surface mount resistors; however, through-hole resistors have pins which are trimmed and inserted into the holes of the PCB, making them easier to solder and more reliable for high-density PCBs. They are also versatile, since they can be used in both low- and high-power applications, depending on their wattage rating. The MFR50SDRD52-2K08 through-hole resistor is one such component that is designed for power applications with a maximum wattage rating of 2kW.

The MFR50SDRD52-2K08 is a 50W through-hole resistor designed for use in high-power applications. The resistor has two pins, one positive and one negative, connected to an embedded wire. The resistor is typically constructed from an insulating substrate such as an alumina, silicon oxide, or quartz substrate that supports two metal plates and a resistive material, such as a carbon or metal film. The resistor is typically coated in a tin, lead or zinc alloy to provide electrical insulation and mechanical protection.

The purpose of the MFR50SDRD52-2K08 through-hole resistor is to reduce current flow in a circuit and to provide isolation from electrical noise. In a typical application, the resistor is used to limit the current flowing into an electrical component, such as an LED. By placing the resistor in series with the LED, the LED will only receive as much current as the resistor will allow, which is determined by the resistor\'s value. The resistor also reduces the buildup of electrical noise by providing a path for static electricity to dissipate and absorbing electromagnetic interference that may occur in the system.

When selecting a through-hole resistor for a certain application, several factors should be taken into consideration. The most important of these is the wattage rating of the resistor. The wattage rating indicates the maximum amount of power the resistor can handle without failing. In the case of the MFR50SDRD52-2K08 through-hole resistor, this is a maximum of 2kW. The wattage rating will determine how much current the resistor can handle and also limits the heat produced by the resistor. It is important to ensure that the wattage rating of the resistor is compatible with the application and that the wattage rating is sufficient to handle the current requirement of the application.

In addition to the wattage rating, the physical size of the MFR50SDRD52-2K08 should also be taken into consideration. The size of the component should be appropriate for the PCB it is designed to be used with. The size of the resistor will impact the amount of current that can be transmitted, as well as the heat dissipation and airflow around it. The size of the resistor should also be taken into consideration when selecting a suitable mounting location for it.

The MFR50SDRD52-2K08 through-hole resistor is designed to provide increased protection to high-power applications such as in power supplies or motor drivers. By providing a reliable path for the current, the resistor helps to reduce the risk of damage to the electrical components in the circuit. By using the appropriate wattage rating and physical size, the MFR50SDRD52-2K08 through-hole resistor can be an effective tool in protecting high-power applications from unnecessary damage or stress.

The specific data is subject to PDF, and the above content is for reference