| Allicdata Part #: | MI-220-IY-F2-ND |
| Manufacturer Part#: |
MI-220-IY-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 5V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 5V 10A... |
| DataSheet: |  MI-220-IY-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Voltage - Output 4: | -- |
| Size / Dimension: | 4.20" L x 2.40" W x 1.00" H (106.7mm x 61.0mm x 25.4mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | Remote On/Off, OCP, OTP, OVP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Current - Output (Max): | 10A |
| Series: | MI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 5V |
| Voltage - Input (Max): | 50V |
| Voltage - Input (Min): | 18V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters: MI-220-IY-F2 Application Field and Working Principle
DC/DC converters are a type of power electronics device. They are used to convert a higher voltage DC input voltage to a lower voltage DC output voltage. The MI-220-IY-F2 is a high performance, high efficiency DC/DC converter with advanced features. It has an input voltage of 24 to 75V, and an output rating of 1.5V at 30A. It is designed for industrial applications such as telecommunications, HVAC, and process control.
The MI-220-IY-F2 is a switching power supply. It takes high DC input voltage and converts it to a low voltage, high current DC output. The input voltage is reduced by a set of switching regulators which control the voltage and current by rapidly switching the output on and off. When the output is "on", the input voltage is stepped down to the output voltage, and when the output is "off", the input voltage is disconnected from the output. This process is repeated at a high frequency, allowing for high efficiency and power conversion.
The MI-220-IY-F2 operates in a range of operating frequencies from 88kHz to 600kHz with a wide input range and output voltage accuracy of ±1%. It features an Active Current Sharing function (ACS) which ensures all output channels are equally loaded when connecting multiple units in parallel. This allows for a seamless transition between the units, allowing loads to be evenly shared and avoiding any sudden changes in output voltage.
The MI-220-IY-F2 has built-in protection features that protect it from transient overloads and short circuits. It also has a soft start function to prevent shock loading on the output. It also has a low-ripple design to together with a temperature compensation circuit that ensures stability over a large temperature range. The unit is also designed with EMI filtering to reduce emissions and external noise.
The MI-220-IY-F2 is designed for use in industrial and commercial applications where a high power output and cost-effectiveness is required. It is used in a wide range of applications, including telecommunications, HVAC, and process control systems. It is an ideal choice for applications where reliability and efficiency are required.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...