Allicdata Part #: | MI-220-MW-S-ND |
Manufacturer Part#: |
MI-220-MW-S |
Price: | $ 384.24 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 5V 20A... |
DataSheet: | MI-220-MW-S Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 349.30300 |
Voltage - Output 4: | -- |
Size / Dimension: | 4.20" L x 1.80" W x 0.50" H (106.7mm x 45.7mm x 12.7mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Current - Output (Max): | 20A |
Series: | MI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5V |
Voltage - Input (Max): | 50V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are devices designed to convert power from direct current (DC) to direct current. The MI-220-MW-S is a DC DC converter compatible with two micro serial standards, namely RS485 and RS422. The MI-220-MW-S has an input voltage range of 12V-48V and an output voltage range of 0.8-2V. The output current is adjustable up to 20A. The device is suitable for a wide variety of applications, from industrial automation to automotive and aerospace.The operation of the MI-220-MW-S DC-DC converter is based on a switching mode power supply (SMPS) topology. SMPS is a type of switched-mode power supply that uses switches to rapidly control power flow and convert a specific voltage and current level to a different voltage and current level, in this case from one DC voltage to another.The MI-220-MW-S SMPS is a two-stage DC-DC converter, with the first stage called the rectifier stage and the second stage called the converter stage. In the rectifier stage, the input voltage is rectified through the use of a bridge rectifier consisting of four diodes. This results in an unregulated direct current voltage at the output of the bridge rectifier. The converter stage then further converts the incoming voltage from AC to DC and regulates it to the desired output voltage.The converter consists of an inductor, capacitor, and two switching devices, in the form of MOSFETs (metal-oxide semiconductor field-effect transistors). The switching devices regulate the power flow from the input to the output of the DC-DC converter. The inductor acts as a buffer and stores energy when the power is flowing out from the input or when the output voltage is high. The capacitor stores energy and ensures that the voltage is constant.The MI-220-MW-S also has a number of protections built-in to prevent it from being damaged in the event of an overload or over-voltage. It has a temperature protection mechanism which shuts down the output in extreme temperatures. It also has over-current and over-voltage protection mechanisms.The MI-220-MW-S is a highly efficient device and is suitable for applications such as industrial automation, automotive and aerospace. It is also used in distributed power systems, power supplies and renewable energy applications. The MI-220-MW-S is a reliable and cost-effective alternative to traditional AC-DC converter systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...