Allicdata Part #: | MI-221-MW-F2-ND |
Manufacturer Part#: |
MI-221-MW-F2 |
Price: | $ 387.69 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 12V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 12V 8.... |
DataSheet: | MI-221-MW-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 352.44700 |
Voltage - Output 4: | -- |
Size / Dimension: | 4.20" L x 2.40" W x 1.00" H (106.7mm x 61.0mm x 25.4mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Current - Output (Max): | 8.3A |
Series: | MI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 12V |
Voltage - Input (Max): | 50V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters allow for the conversion of electrical energy from one electrical potential to another. The MI-221-MW-F2 is one such DC-DC converter, and it is used in a number of different applications. In this article, we will explore the application fields and working principles of the MI-221-MW-F2.
The MI-221-MW-F2 is a DC-DC converter that is suitable for use in several different applications. It is primarily used in power systems for DC-link circuit applications. It is compatible with P3V, S6V, and N2V power supplies, and its output power capability ranges from 10W to 75W. The MI-221-MW-F2 also features high efficiency DC boost with dynamic step-down and can be used for converter designs. It is specifically used to convert the input DC voltage to the desired output DC voltage.
The working principle of the MI-221-MW-F2 is quite simple. It works on the principle of transformation of electrical energy through electromagnetic induction. The MI-221-MW-F2 consists of a transformer, an inductor, a rectifier, and a capacitor. When the input voltage is applied to the transformer, the transformer generates an alternating current (AC) voltage. This AC voltage is then rectified by a rectifier, and the rectified voltage is stored in a capacitor. The output voltage is then obtained by controlling the on/off switching of the inductor. The switching frequency of the inductor is also varied to obtain the desired output voltage. With this design, the MI-221-MW-F2 is able to efficiently and reliably convert a DC input voltage to the desired DC output voltage.
The MI-221-MW-F2 can be used in a number of different applications, such as in motor controls, selectable speed and acceleration/deceleration, high-speed digital signal processing, and DC switch mode power supplies. It can also be used in applications such as voltage regulators, step-up/step-down converters, cleaning circuits, and more. Additionally, the MI-221-MW-F2 is suitable for battery charging applications, power converters, and low-power systems.
In conclusion, the MI-221-MW-F2 is a DC-DC converter that is suitable for a variety of applications. The working principle of the MI-221-MW-F2 is based on the transformation of electrical energy through electromagnetic induction, and it is able to be used in a number of different applications such as motor controls, selectable speed and acceleration/deceleration, high-speed digital signal processing, and DC switch mode power supplies.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...