| Allicdata Part #: | MI-224-IY-F3-ND |
| Manufacturer Part#: |
MI-224-IY-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 48V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 48V 1.... |
| DataSheet: |  MI-224-IY-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Voltage - Output 4: | -- |
| Size / Dimension: | 4.20" L x 2.40" W x 0.75" H (106.7mm x 61.0mm x 19.0mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | Remote On/Off, OCP, OTP, OVP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Current - Output (Max): | 1.04A |
| Series: | MI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 48V |
| Voltage - Input (Max): | 50V |
| Voltage - Input (Min): | 18V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC/DC converters are used in multiple applications in the electronic industry. These converters are used to regulate the power consumption of its loads and to match the output voltage to the specific needs. The MI-224-IY-F3 DC/DC converter is a popular converter among engineers for its simple design and reasonable price. It is mainly used in high power applications due to its high power efficiency and ability to convert large amounts of power.
The MI-224-IY-F3 is a circuit-switched direct-current DC/DC converter with high power density and low EMI. It has an input voltage range of 4.5V to 14V and an output voltage range of 0.8V to 12V. It has a maximum efficiency of 93% at full load. This is achieved by its high-frequency pulse-width modulation control circuit and low-dropout linear voltage regulator. It also has built-in short-circuit protection as well as overvoltage and overcurrent protection.
The main application of the MI-224-IY-F3 DC/DC converter is in energy-efficient set-top boxes, servers, portable equipment, industrial IoT devices and other high power applications. It helps reduce energy consumption by regulating the power consumption and helps improve the efficiency of the device.
The working principle of the MI-224-IY-F3 DC/DC converter is based on regulated power conversion. It uses a combination of buck and boost modes. When in buck mode, it converts the input voltage to a lower output voltage. In boost mode, it increases the output voltage to a higher level than the input voltage. For efficient conversion, it uses a high-frequency pulse-width modulation (PWM) control circuit. This control circuit first switches the device at a high frequency (typically 200KHz) and then modulates the duty cycle to regulate the output voltage.
The MI-224-IY-F3 DC/DC converter is a versatile and reliable power converter with high efficiency and excellent transient response. It is easy to use and requires minimal external components. With its high power conversion efficiency, robust protection features and wide input and output voltage range, this converter is ideal for high power applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...