Allicdata Part #: | MI-22L-MW-ND |
Manufacturer Part#: |
MI-22L-MW |
Price: | $ 373.16 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 28V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 28V 3.... |
DataSheet: | MI-22L-MW Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 339.23000 |
Voltage - Output 4: | -- |
Size / Dimension: | 4.20" L x 2.40" W x 0.50" H (106.7mm x 61.0mm x 12.7mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Current - Output (Max): | 3.57A |
Series: | MI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 28V |
Voltage - Input (Max): | 50V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters allow voltage to be regulated efficiently over a wide range of input voltages and currents. This type of converter is essential for most electronic applications, including renewable energy systems, automotive and recreational vehicles, mobile and portable electronics, and industrial and medical applications. The MI-22L-MW is a high-efficiency, 2-stage, buck/boost DC-DC converter from Menu Engineering Solutions. It is designed for applications requiring high input voltage ranges and up to 22 amps of continuous output power.
The MI-22L-MW is a high performance and reliable, 2-stage converter. It uses two stages of power conversion, first a buck converter and then a boost converter. The two stages together provide higher conversion efficiency, higher output power and a wide input voltage range which can range from 7-54 Volts. This ensures that the MI-22L-MW can be used in a wide variety of applications, including solar energy systems, automotive, RV, medical, and industrial applications.
The MI-22L-MW\'s two-stage design is more efficient than traditional single stage DC-DC converters. The buck converter regulates voltage by converting input voltage to a lower voltage, while the boost converter increases the output voltage from the buck converter. By using two stages, the MI-22L-MW can offer higher efficiency and a much wider input voltage range. In addition, the MI-22L-MW has an output current limit function which optimises the output power and efficiency of the converter by limiting the output current when it exceeds a set current limit.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...