Allicdata Part #: | MI-22M-IW-F1-ND |
Manufacturer Part#: |
MI-22M-IW-F1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 10V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 10V 10... |
DataSheet: | MI-22M-IW-F1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Output 4: | -- |
Size / Dimension: | 4.20" L x 2.40" W x 0.75" H (106.7mm x 61.0mm x 19.0mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Current - Output (Max): | 10A |
Series: | MI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 10V |
Voltage - Input (Max): | 50V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC Converters are used to convert low voltage direct current (DC) into higher voltage DC, essentially stepping up or stepping down the voltage to the desired level in a given application. The MI-22M-IW-F1, or the Sissoko MicroIntegrator-22V-DC-1W-F1 as it is sometimes referred to, is one such converter. This device is best suited for applications requiring a tiny switch mode DC to DC converter with wide line and load regulation ranges.
The MI-22M-IW-F1 contains a high-efficiency switch mode power supply IC which operates in pulse width modulation (PWM) control. This feature enables the converter to accommodate various input voltages across a range of 9V to 18V and output voltages of 5V to 22V. The rated output power of the converter is 1W and the line and load regulation ranges are an impressive ±2.5%.
The MI-22M-IW-F1 is cooled through a thermal plastic package and it is designed for board level mounting onto PCBs and other substrate. The ultra-compact size of the converter makes it ideal for use in applications where space is limited. Moreover, the converter requires minimal external components and can easily be implemented in any application.
The advantages of the MI-22M-IW-F1 converter, include a low number of external components for ease of implementation, enhanced line and load regulation, wide input and output voltage ranges, high efficiency, and an ultra-compact size. This converter is suitable for applications where power dissipation is a concern due to its high efficiency circuit design.
The working principle of the MI-22M-IW-F1 is straightforward. Input power is applied to the converter via a standard DC connector. This power is then converted to a pulse-width modulated (PWM) signal using a high-efficiency power supply IC. This signal is then regulated to the desired output voltage, which is fed out via a corresponding DC connector. The conversion process is regulated by a high-speed error amplifier, ensuring precise output voltage.
The MI-22M-IW-F1 is an ideal solution for low power dissipation applications requiring a high-efficiency DC to DC converter with wide line and load regulation. This device is a great choice for applications such as industrial systems, telecommunication, instrumentation, and power systems. The MI-22M-IW-F1 can be used to supply power to loads which range from low power circuits up to 1W of regulated power.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...