Allicdata Part #: | MI-22M-IW-F2-ND |
Manufacturer Part#: |
MI-22M-IW-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 10V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 10V 10... |
DataSheet: | MI-22M-IW-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Output 4: | -- |
Size / Dimension: | 4.20" L x 2.40" W x 1.00" H (106.7mm x 61.0mm x 25.4mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Current - Output (Max): | 10A |
Series: | MI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 10V |
Voltage - Input (Max): | 50V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC/DC converters are an integral part of many modern electronics systems. They are used to convert a DC voltage from one value to another, depending on the application. In this article, we will discuss the application field and working principle of the MI-22M-IW-F2 DC/DC converter.
The MI-22M-IW-F2 is a low-power, high-efficiency DC/DC converter from the Maxim Integrated family of power management components. It is ideal for use in applications that require a wide input voltage range, low quiescent current, high efficiency, and good transient response. The device is rated for up to 10W of continuous output power and operates from a wide input voltage range of 3.4V to 32V.
In terms of its application field, this device can be used to power a variety of electronics applications such as automotive, industrial, PLCs, HVAC, metering, and telecom. It is also suitable for applications such as motor controls, motion controllers, and drives. The device’s wide input voltage range and high efficiency make it an ideal choice for use in power management and in distributed power systems.
The MI-22M-IW-F2 is a buck-type DC/DC converter with adjustable output voltage and a single, integrated MOSFET. The device has both constant voltage and current control modes of operation, and it can be used in applications where very low noise is required. It also features integrated protections for overcurrent, overvoltage, and overtemperature, as well as short-circuit protection and thermal shutdown.
The working principle of the MI-22M-IW-F2 can be broken down into three simple steps. First, the input voltage is converted into a regulated DC output voltage through a buck-type voltage regulator. This is facilitated by a control loop signal which determines the proper bias voltage for the MOSFET. Next, the input current is regulated by adjusting the duty cycle of the buck regulator. Finally, the output voltage is monitored and adjusted if necessary. This ensures that the output voltage does not exceed the specified maximum ratings.
In conclusion, the MI-22M-IW-F2 is a highly efficient, low-noise DC/DC converter from the Maxim Integrated family of power management solutions. Its wide input voltage range, low quiescent current draw, and high efficiency make it an ideal choice for applications where power efficiency and low noise levels are required. The device’s working principle is simple and can be broken down into three steps. Finally, the integrated protections, such as overvoltage and overtemperature, make the device safe and reliable for use in a variety of applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...