Allicdata Part #: | MI-22M-IW-F3-ND |
Manufacturer Part#: |
MI-22M-IW-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 10V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 10V 10... |
DataSheet: | MI-22M-IW-F3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Output 4: | -- |
Size / Dimension: | 4.20" L x 2.40" W x 0.75" H (106.7mm x 61.0mm x 19.0mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Current - Output (Max): | 10A |
Series: | MI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 10V |
Voltage - Input (Max): | 50V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are used in several applications as they offer higher performances with lower power consumption. The MI-22M-IW-F3 DC-DC converter is a very efficient and reliable converter designed for various applications in different sectors. This converter is efficient, reliable and cost-effective. It is also easy to install and use.
The MI-22M-IW-F3 is a versatile DC-DC converter. It is capable of providing higher than nominal output power and also supports multiple applications. It is suitable for a wide range of systems from basic lighting to small-scale PV systems. Its versatile functions include output voltage trim, current trim, over-voltage protection, over-temperature protection, power boosting and under-voltage protection. This allows the MI-22M-IW-F3 to be customized to suit the particular application.
The working principle of the MI-22M-IW-F3 DC-DC converter is based on the Buck Converter architecture. In this converter, the input current is regulated by a PWM comparator, which in turn controls the switching of the power switch. The energy stored in the inductor is then reshaped and sent to the load through a diode. The output voltage is adjusted by the duty cycle and is determined by the maximum duty cycle and the inductor value. The switch resistance also plays an important role in determining the performance of the converter.
The MI-22M-IW-F3 DC-DC converter can be used in many applications. It is suitable for automotive applications, industrial equipment, renewable energy systems, lighting systems, and other DC power systems. Additionally, it can be used with controllers and regulators in order to adjust and improve the system’s performance. The MI-22M-IW-F3 DC-DC converter is especially suitable for high power density applications.
The MI-22M-IW-F3 is a reliable and efficient DC-DC converter. Its high efficiency, reliability and cost-effectiveness make it a good choice for various applications. It also has a wide range of features including voltage trim, current trim, over-voltage protection, over-temperature protection, power boosting and under-voltage protection. This makes the MI-22M-IW-F3 an ideal choice for a wide range of systems from basic lighting to small-scale PV systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...