| Allicdata Part #: | MI-22M-MX-ND |
| Manufacturer Part#: |
MI-22M-MX |
| Price: | $ 347.54 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 10V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 10V 7.... |
| DataSheet: |  MI-22M-MX Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | $ 315.94500 |
| Voltage - Output 4: | -- |
| Size / Dimension: | 4.20" L x 2.40" W x 0.50" H (106.7mm x 61.0mm x 12.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | Remote On/Off, OCP, OTP, OVP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Current - Output (Max): | 7.5A |
| Series: | MI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 10V |
| Voltage - Input (Max): | 50V |
| Voltage - Input (Min): | 18V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
DC DC Converters are essential components for many power systems. This article describes the application field and working principle of the MI-22M-MX, a popular DC DC Converter.
Application Field
The MI-22M-MX is an advanced power converter designed for applications requiring high efficiency and reliability. It is primarily used in data communication networks and distributed power systems, such as Telecom Central Offices and VoIP exchanges. Additionally, the MI-22M-MX can be used in space-constrained applications, such as automation systems and medical applications.
Working Principles
The MI-22M-MX is a symmetric bidirectional DC DC converter. The converter can accept input voltages from 18V to 36V and output up to 20V. Output voltages can be adjusted in 2V increments. The MI-22M-MX employs active optimum energy conservation control (OE2) to reduce idle current consumption and increase efficiency.
The MI-22M-MX has a maximum output power of 222W and an impedance of less than 0.1Ohm. It is also designed with a soft-start feature for smooth power up and power down. The converter is protected by a variety of safeties, such as over-temperature protection, overtemperature warning, output current protection, and open loop protection.
The MI-22M-MX uses a step-down converter architecture. The input voltage is filtered and regulated by the input rectifier and DC-DC regulator. The DC-DC regulator then converts the input voltage to the desired output voltage. The input voltage can be adjusted manually or using the OE2 control. Finally, the output current is regulated using a variable frequency oscillator (VFO) and an output control circuit.
Conclusion
The MI-22M-MX is a high-efficiency and reliable DC DC converter. It is ideal for applications requiring reliable operation in space-constrained environments, such as automation and medical systems. The converter uses an active OE2 control to reduce idle current consumption and increase efficiency. Additionally, the MI-22M-MX is equipped with a variety of safety features to protect against overloads and short circuits.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...