| Allicdata Part #: | MI-22M-MY-F2-ND |
| Manufacturer Part#: |
MI-22M-MY-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 10V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 10V 5A... |
| DataSheet: |  MI-22M-MY-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Voltage - Output 4: | -- |
| Size / Dimension: | 4.20" L x 2.40" W x 1.00" H (106.7mm x 61.0mm x 25.4mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | Remote On/Off, OCP, OTP, OVP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Current - Output (Max): | 5A |
| Series: | MI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 10V |
| Voltage - Input (Max): | 50V |
| Voltage - Input (Min): | 18V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are electrical devices that transform DC electrical energy from one voltage level to another. They are used in a variety of applications, from small consumer products to large industrial systems. In most DC-DC converter applications, the input source is a large battery with a low voltage to provide power for the device, while the output is a higher voltage and current to meet the requirement of the load. One such type of DC-DC converter is the MI-22M-MY-F2.
The MI-22M-MY-F2 is a step-up DC-DC converter that is designed to power small loads with an input voltage of 2.4V to 6V. It is a high-efficiency, synchronous step-up DC-DC converter that uses the current-mode control topology. It is sonically enhanced, self-oscillating, and can operate at frequencies up to 2 MHz. It has excellent transient response and is capable of outputting up to 300 mA of peak load current.
The MI-22M-MY-F2 is designed for use in a variety of applications, such as cell phones, MP3 players, digital cameras, and other portable electronics. It is a very efficient device, with a total efficiency of up to 95%. It also has a wide input voltage range, and can operate from a 2.4V source up to a 6V source, making it ideal for use with a variety of sources. In addition, it has an adjustable output voltage from 3V to 12V. This makes it versatile and capable of powering a variety of devices.
The MI-22M-MY-F2 operates by using Pulse Width Modulation (PWM) to regulate the output voltage. The device is enabled using an enable signal, and is able to adjust the switching frequency depending on the input voltage, load, and other factors. This helps to ensure that the device operates at an optimum level for the most efficient operation. In addition, it has built-in protections, such as soft start, over voltage protection, and over temperature protection, which help to prevent damage to the device and the load.
The MI-22M-MY-F2 is a very popular and dependable DC-DC converter, and is used in a variety of applications. It is simple to use, efficient, and can operate in a wide range of input voltages. It is ideal for use in portable electronics, and can help to power devices in a safe and reliable way.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...