Allicdata Part #: | MI-22N-MW-ND |
Manufacturer Part#: |
MI-22N-MW |
Price: | $ 373.16 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 18.5V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
DataSheet: | MI-22N-MW Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 339.23000 |
Voltage - Output 4: | -- |
Size / Dimension: | 4.20" L x 2.40" W x 0.50" H (106.7mm x 61.0mm x 12.7mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Current - Output (Max): | 5.4A |
Series: | MI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 18.5V |
Voltage - Input (Max): | 50V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are a form of power control that works by converting a low voltage and high current into a high voltage and low current. One of the types of DC-DC converters is the DC to DC MI-22N-MW, which is a low-power switching regulator IC typically used in applications such as voltage regulation, voltage stabilization, and charge control. The MI-22N-MW is specially designed for use in applications requiring a high reliability, low power surface mount regulator.
The MI-22N-MW is an adjustable voltage regulator that uses low dropout (LDO) technology to maintain a steady output voltage over input voltage and load current variations. It is designed to be used in applications where power supply noise could become an issue, such as portable electronics, industrial equipment, or consumer products. The output voltage of the MI-22N-MW can be easily adjusted by means of an external resistor, which allows the user to fine-tune the output voltage during operation. It also contains built-in protection circuits for over current, short-circuit, and under-voltage protection.
The MI-22N-MW operates on a switched-mode topology, which makes it highly efficient. In the switched-mode topology, the input voltage is connected to a power switch, which is in turn connected to the output voltage by a reaction circuit. At a given switching frequency, the power switch can be turned on and off by a control circuit, allowing the output voltage to remain almost constant. Because the power switch switches on and off at a high frequency, the power conversion process is very efficient.
The MI-22N-MW also has a wide input voltage range, ranging from 2.2V to 6V. The maximum output current for this device is 200mA and the output voltage can be set from 0.8V to 6V. The low ESR ceramic output capacitor allows the MI-22N-MW to be used in noise sensitive applications. In addition, the device has an internal soft start circuit that helps to reduce the inrush current and prolong the life of the output capacitor.
The MI-22N-MW is an ideal device for applications requiring a low-power, high-reliability, surface-mount regulator. Its wide input voltage range and output current capability makes it suitable for a variety of applications. Its low dropout technology and protection circuits provides an added level of safety for users. The device is also easy to adjust and set up, thanks to its external resistor control. Overall, the MI-22N-MW offers a reliable and efficient solution for DC-DC power conversion.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...