| Allicdata Part #: | MI-22P-IW-F3-ND |
| Manufacturer Part#: |
MI-22P-IW-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 13.8V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 13.8V ... |
| DataSheet: |  MI-22P-IW-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Voltage - Output 4: | -- |
| Size / Dimension: | 4.20" L x 2.40" W x 0.75" H (106.7mm x 61.0mm x 19.0mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | Remote On/Off, OCP, OTP, OVP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Current - Output (Max): | 7.2A |
| Series: | MI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 13.8V |
| Voltage - Input (Max): | 50V |
| Voltage - Input (Min): | 18V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are widely used in many industries. They are used to convert direct current (DC) power from one voltage source to another, typically higher and lower power levels. One such DC DC converter is the MI-22P-IW-F3. This article will discuss the application field and working principle of the MI-22P-IW-F3.
The MI-22P-IW-F3 is a wide-input voltage DC DC converter. It is designed to provide a wide range of inputs, from 48V to 110V. It uses a two-stage voltage regulator and a full-wave rectifier to convert the input voltage to a stable DC voltage output. The input voltage can be either AC or DC. The output voltage can also be adjusted, up to a maximum of 24V.
The MI-22P-IW-F3 DC DC converter is suitable for use in a variety of applications. It is commonly used in automation, industrial control, medical and power systems. It can provide short-circuit protection, reverse-polarity protection, overvoltage protection and overcurrent protection. Additionally, it is designed to be highly reliable, with a long-life expectancy and robust construction.
The working principle of the MI-22P-IW-F3 DC DC converter is relatively simple. When the input voltage is applied, a full-wave rectifier circuit converts the AC signal to a DC signal. This is then regulated by the two-stage voltage regulator and outputted as a stable DC voltage. The output voltage is adjustable by adjusting the regulators.
The MI-22P-IW-F3 is a reliable and efficient DC DC converter. Its wide input voltage range makes it ideal for a variety of applications. Additionally, its protection features make it safe to use, even in potentially hazardous environments. The operating principle is straightforward, and it is designed for long-term reliability and service life. The MI-22P-IW-F3 is a great choice for any DC powered application.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...