Allicdata Part #: | MI-25V-MW-S-ND |
Manufacturer Part#: |
MI-25V-MW-S |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.8V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 1... |
DataSheet: | MI-25V-MW-S Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Output 4: | -- |
Size / Dimension: | 4.20" L x 1.80" W x 0.50" H (106.7mm x 45.7mm x 12.7mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Current - Output (Max): | 17.2A |
Series: | MI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5.8V |
Voltage - Input (Max): | 210V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are devices used to transfer a constant voltage from one DC power source to another DC power source. They are commonly used to convert from one voltage level to another in applications such as automotive, telecommunications, and industrial. The MI-25V-MW-S is a type of DC-DC converter, which is designed to provide regulated voltage conversion between two voltage levels. This is commonly needed in automotive, telecommunications, and industrial applications.
The MI-25V-MW-S converter is designed to convert a DC input voltage from 6-22 VDC up to a regulated 25 VDC output voltage. This is done using a synchronous rectified buck-boost topology, and a very low drop-out voltage regulator. The synchronous rectified buck-boost topology means that the output voltage can remain constant regardless of the load conditions, and is able to provide up to 2.5 A of output current. The low drop-out voltage regulator also helps to maintain a very tight regulation of the output voltage.
The MI-25V-MW-S converter is designed to be compact and efficient, while still providing a good amount of output current. It features a wide input voltage range of 6-22 VDC, and can withstand a transients in the input voltage up to 28 V. This enables it to safely operate in a wide variety of automotive, telecommunications, and industrial applications. It also features an EMI filter to reduce the amount of electromagnetic interference it generates.
The MI-25V-MW-S converter is built with a number of safety features, including over-voltage protection, reverse-voltage protection, over-temperature protection, and dual MOSFET protection. This helps to ensure that the device is both safe to use and reliable in operation. The converter is also designed with a number of features to improve performance, including output current limiting, output voltage monitoring, and thermal foldback.
The MI-25V-MW-S converter is a cost-effective and reliable solution for providing regulated voltage conversion in automotive, telecommunications, and industrial applications. Its wide input voltage range, low drop-out voltage regulator, EMI filter, and safety features make it an ideal solution for applications that require tight voltage regulation. Its compact size and high efficiency make it suitable for applications where space is limited or power efficiency is paramount.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...