Allicdata Part #: | MI-25V-MY-F4-ND |
Manufacturer Part#: |
MI-25V-MY-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.8V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 8... |
DataSheet: | MI-25V-MY-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | MI-200™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 100V |
Voltage - Input (Max): | 210V |
Voltage - Output 1: | 5.8V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Voltage - Output 4: | -- |
Current - Output (Max): | 8.6A |
Power (Watts): | 50W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | Remote On/Off, OCP, OTP, OVP |
Operating Temperature: | -55°C ~ 85°C |
Efficiency: | 90% |
Mounting Type: | Through Hole |
Package / Case: | Full Brick |
Size / Dimension: | 4.20" L x 2.40" W x 1.00" H (106.7mm x 61.0mm x 25.4mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC converters are devices used to convert DC power from one voltage level to another. The MI-25V-MY-F4 is such a device, which is used to step-up a low voltage DC input to a much higher voltage DC output. It is a compact, lightweight and cost-effective DC to DC converter that is perfect for use in a variety of applications.
The basic principle behind the operation of the MI-25V-MY-F4 is to convert a low voltage DC input into a much higher voltage DC output using a switching technology technique employing an input transformer, switching devices, control circuits and an output transformer. To do this, the input voltage is applied to the primary winding of the input transformer. As the voltage is stepped up by the transformer, an output voltage is created across the secondary winding, where the voltage is amplified through a set of switching devices.
The control circuitry manages the switching of the switching devices to provide the desired output voltage. These switching devices are then used to supply the amplified output voltage across the secondary winding of the output transformer. The output voltage on the secondary winding of the output transformer is then connected to the output ports of the MI-25V-MY-F4 DC to DC converter, giving the required voltage.
Due to its small size and light weight, the MI-25V-MY-F4 is suitable for various applications, from medical equipment and embedded systems, to communications, robots, consumer electronics and more. To give an example, the MI-25V-MY-F4 was used as part of an embedded system for a commercial drone used for surveillance and data gathering. The MI-25V-MY-F4 was used to convert the low voltage DC power supplied by the battery in the drone to the much higher voltage DC power needed to run the onboard camera and sensor system.
The MI-25V-MY-F4 DC to DC converter provides a cost-effective solution to many application needs due to its versatility. Its ease of installation, high efficiency and robust design make it an ideal choice for applications where flexibility and cost are key considerations.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...