Allicdata Part #: | MI-26M-MW-F2-ND |
Manufacturer Part#: |
MI-26M-MW-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 10V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 10V 10... |
DataSheet: | MI-26M-MW-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Output 4: | -- |
Size / Dimension: | 4.20" L x 2.40" W x 1.00" H (106.7mm x 61.0mm x 25.4mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Current - Output (Max): | 10A |
Series: | MI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 10V |
Voltage - Input (Max): | 400V |
Voltage - Input (Min): | 125V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are commonly used in applications like automotive electronic systems, industrial power electronics, laptop computers, and medical equipment. The MI-26M-MW-F2 is a compact DC-DC converter designed for these products. It offers a wide input voltage range and an integrated switchmode power supply that can provide up to 20A output current.
The MI-26M-MW-F2 is a switched-mode power supply using a combination of PWM (Pulse Width Modulation) and Peak Current Mode Control (PCM). It has an input voltage range from 6 to 36 volts, and an output voltage range up to 24 volts. The output power can be set from 0 to 20 amps. It comes with a built-in protection circuitry to ensure safe operation.
The MI-26M-MW-F2 is designed to be used in automotive applications, but its high reliability and wide input voltage range makes it suitable for other applications as well. The converter uses a continuous conduction mode operation, which is able to provide high efficiency, low output voltage ripple and low noise. Its temperature range is specified from -40°C to +85°C.
The working principle of the MI-26M-MW-F2 is based on the principle of switched-mode power supplies. Switching is done by an internal Pulse Width Modulation (PWM) module. The PWM module controls the input voltage so that it is always in line with the load requirements. The output voltage is controlled by the Peak Current Mode Control (PCM) module.
The design of the MI-26M-MW-F2 makes it an ideal choice for designers looking for a compact and efficient DC-DC converter. It is highly reliable and offers excellent thermal performance. With its wide input voltage range and integrated SwitchMode Power Supply (SMPS) technology, it is able to provide up to 20A output currents.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...