| Allicdata Part #: | MI-26M-MX-F3-ND |
| Manufacturer Part#: |
MI-26M-MX-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 10V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 10V 7.... |
| DataSheet: |  MI-26M-MX-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Voltage - Output 4: | -- |
| Size / Dimension: | 4.20" L x 2.40" W x 0.75" H (106.7mm x 61.0mm x 19.0mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | Remote On/Off, OCP, OTP, OVP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Current - Output (Max): | 7.5A |
| Series: | MI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 10V |
| Voltage - Input (Max): | 400V |
| Voltage - Input (Min): | 125V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are rapidly becoming a vital part of the modern world, providing increased efficiency and reliability for many applications in industrial, electric, and communications settings. The MI-26M-MX-F3 DC-DC converter is an advanced unit that uses a novel multi-level design to provide an excellent level of efficiency, as well as high reliability and robustness.
The MI-26M-MX-F3 is a three-level, isolated, DC-DC converter. It is designed to provide a high input-to-output voltage conversion ratio, with a minimum input voltage of ≤ 20VDC and a maximum output voltage of 350V. It features an operating temperature range of -20ºC to +70ºC and a wide range of protection features, such as over current, over voltage, and over temperature protection.
The main components of the MI-26M-MX-F3 are the AC-DC bridge rectifier, EMI filters, thermistor, PFC Boost inductor, main switch, and the three-level DC-DC converter. The AC-DC bridge rectifier converts the AC mains voltage into a unregulated DC voltage. This DC voltage is then filtered by EMI and thermistor filters for EMI/RFI protection. The filtered DC is passed through a PFC boost inductor that boosts the mains voltage for buck/boost applications. The main switch is then used to regulate the output voltage of the converter.
The three-level DC-DC converter then takes the output of the main switch and generates a regulated, isolated, DC output voltage. This is done by using an inductor in the secondary side of the converter. This inductor boosts the DC voltage from the main switch, allowing the converter to provide a higher output voltage.
The MI-26M-MX-F3 is an excellent choice for many applications, such as a battery charging, solar inverters, motor drives, DC-DC converters, DC/DC converters, HVAC, and other industrial applications. Its wide input-to-output voltage conversion range, high reliability, and protection features make it an ideal solution for many industrial and electric applications. It is also very easy to use and maintain, requiring no special tools or training.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...