Voltage - Output 4:	--
Size / Dimension:	4.20" L x 2.40" W x 1.00" H (106.7mm x 61.0mm x 25.4mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 85°C
Features:	Remote On/Off, OCP, OTP, OVP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	50W
Current - Output (Max):	5A
Series:	MI-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	10V
Voltage - Input (Max):	400V
Voltage - Input (Min):	125V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

DC-DC converters are power electronic devices that are used to convert electrical energy from one voltage level to another. The MI-26M-MY-F4 is a unique type of DC-DC converter that is designed for a wide range of applications. This article will discuss the application field and working principle of the MI-26M-MY-F4 DC-DC converter.

Application Field

The MI-26M-MY-F4 DC-DC converter is very versatile and can be used in a wide range of applications. It is primarily used to convert DC voltages to lower or higher DC voltages, such as converting 12V to 24V or 24V to 12V. It can also be used to provide a constant output voltage when the input voltage is varying, which is often required in renewable energy applications such as wind and solar power systems, and in battery-operated devices.The MI-26M-MY-F4 converter is also used in industrial and commercial applications, where DC-DC conversion is required to provide a consistent power supply. In addition, it can be used in adjustable power supplies, where it is necessary to adjust the output voltage or current in order to match specific loads.

Working Principle

The MI-26M-MY-F4 DC-DC converter uses the principle of Pulse Width Modulation (PWM) in order to convert DC voltages. In this type of converter, a PWM signal is generated with a fixed frequency by a microprocessor, which then drives a MOS transistor switch. This switch is used to alternately transfer electrical energy from the input voltage to the inductor, and then to the output voltage when the transistor is turned off.As the transistor is repeatedly turned on and off, the duty cycle of the signal is varied in order to control the amount of energy transferred from the input voltage to the output voltage. By controlling the duty cycle, the output voltage of the converter can be adjusted to any desired level, thus allowing the designer to tailor the output voltage to match the specific requirements of the load.

Conclusion

The MI-26M-MY-F4 DC-DC converter is a versatile and reliable device that can be used in a wide range of applications. It is designed to convert DC voltages to lower or higher DC voltages, and can also be used to provide a constant output voltage when the input voltage is varying. The working principle of the MI-26M-MY-F4 converter is based on the Pulse Width Modulation (PWM) concept, where a PWM signal is generated and used to control the amount of energy transferred from the input voltage to the output voltage.

The specific data is subject to PDF, and the above content is for reference