Allicdata Part #: | MI-26Z-MV-F4-ND |
Manufacturer Part#: |
MI-26Z-MV-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 2V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 2V 30A... |
DataSheet: | MI-26Z-MV-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Output 4: | -- |
Size / Dimension: | 4.20" L x 2.40" W x 1.00" H (106.7mm x 61.0mm x 25.4mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Current - Output (Max): | 30A |
Series: | MI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 2V |
Voltage - Input (Max): | 400V |
Voltage - Input (Min): | 125V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are electronic components used to provide electrical power from a source of direct current (DC) power into a load requiring alternating current (AC) power. They are commonly used in cars, computers, and other consumer electronics devices for a variety of applications. One of the types of DC DC converters is the MI-26Z-MV-F4, which is designed to provide a stable output voltage with a wide input range.
The MI-26Z-MV-F4 is a step-up DC DC converter, also known as a DC/DC boost converter. It takes in a low voltage DC input and produces a higher voltage DC output. Rather than using a transformer for voltage transformation, this converter uses an integrated circuit (IC) and several capacitors and inductors to store and release energy. The circuit has two basic portions: the power stage and the control stage.
The power stage is composed of an H-bridge circuit on the primary side, an inductor, a diode, and a capacitor on the secondary side. When the switch in the H-bridge circuit of the power stage is switched on, current flows from the source into the primary coil of the inductor. This current produces a magnetic field in the primary coil, which induces a voltage in the secondary coil. This voltage is then stored in the secondary capacitor providing a low output ripple voltage. The control stage consists of a comparator, an operational amplifier, a reference voltage, and a feedback circuit. The comparator compares the input voltage to the feedback voltage and the amplifier is used to control the switch’s duty cycle.
The primary advantage of the MI-26Z-MV-F4 is its high efficiency. It can achieve up to 97% efficiency, making it one of the most efficient step-up converters. It is also capable of providing a wide range of output voltages (up to 40V) and a large current handling capacity of up to 10A. This makes it suitable for a wide range of applications including laptops, portable electronics, smart phones, medical equipment, and LED lighting.
The MI-26Z-MV-F4 is also designed to be simple to use. It has built-in over-voltage, overload, and short-circuit protection mechanisms as well as an integrated temperature compensation to ensure stable output voltage. Its small size (4.4x4.8x1.6mm) and low no-load input current of 1uA also make the MI-26Z-MV-F4 a compact, low-cost solution for applications where space and power consumption are important factors.
In conclusion, the MI-26Z-MV-F4 is a high efficiency, wide range, and low power consumption step-up DC DC converter. It is suitable for a variety of applications, including laptops, portable electronics, and medical equipment, and offers protection mechanisms to ensure a stable output voltage. It is an easy to use, low-cost solution that can provide a wide range of output voltages and up to 10A current to maximize efficiency in a limited space.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...