Allicdata Part #: | MI-27Z-MX-F1-ND |
Manufacturer Part#: |
MI-27Z-MX-F1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 2V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 2V 15A... |
DataSheet: | MI-27Z-MX-F1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Output 4: | -- |
Size / Dimension: | 4.20" L x 2.40" W x 0.75" H (106.7mm x 61.0mm x 19.0mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Current - Output (Max): | 15A |
Series: | MI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 2V |
Voltage - Input (Max): | 310V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC converters are used in many industry applications, such as automotive, aerospace, medical, military and consumer electronics. The MI-27Z-MX-F1 DC to DC converter is a high performance regulator technology that has been developed to meet the demanding requirements of high temperature, high power and fast transient response applications. It is designed to offer high efficiency, low output noise and excellent transient response over a wide input voltage range.
The MI-27Z-MX-F1 DC to DC converter is a step-down/step-up switcher module with a wide operating input voltage range of 9V to 36V and a very high power output of up to 40V and 5A. It has low output noise of 10mVrms and fast (sub 10μs) transient response. The device is fully protected with short circuit protection, due to the integrated over-current protection, and thermal protection thanks to the integrated thermal shutdown circuitry.
The MI-27Z-MX-F1 DC to DC converter is suitable for many applications such as automotive, aerospace, consumer electronics, military, and medical electronics. It is ideal for applications where fast response and low levels of output noise are required. The module is designed to provide a safe and reliable operation in harsh environments, with an operating temperature range of -40°C to +85°C.
The working principle of the MI-27Z-MX-F1 DC to DC converter is based on a multi-phase switching regulator that uses the pulse width modulation (PWM) technique. The converter has two stages, the first stage being the PWM controller stage, and the second stage is the power-stage stage. The PWM controller controls the voltage and current being delivered to the load, and this is done by regulating the duty cycle of the switching device, which generates a pulse-width modulated (PWM) signal. This signal is then amplified by the power-stage stage, which delivers the voltage and current being requested by the load.
The MI-27Z-MX-F1 DC to DC converter has many advantages compared to other DC to DC converters. It has a wide operating voltage range, a high output power, low output noise, fast transient response and a high efficiency. Additionally, it is designed to be safe and reliable in harsh environments, making it suitable for many industry applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...