Allicdata Part #: | MI-J2K-IZ-F4-ND |
Manufacturer Part#: |
MI-J2K-IZ-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 40V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 40V 62... |
DataSheet: | MI-J2K-IZ-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 625mA |
Size / Dimension: | 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm) |
Package / Case: | 9-DIP Module |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 25W |
Series: | MI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 40V |
Voltage - Input (Max): | 50V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC converters are an important part of electronic power management and one of the most versatile technologies for powering devices. The MI-J2K-IZ-F4 DC to DC converter is suitable for a variety of applications and is designed to provide increased power efficiency, reliability and controllability. This article will provide an overview of the MI-J2K-IZ-F4 application field and its working principle.
The MI-J2K-IZ-F4 DC to DC converter is designed for use in a variety of applications. It is a low voltage switch mode power supply designed for stand-alone usage, such as in a digital audio-visual system. It is able to provide a regulated output voltage of up to 48V with a maximum output power of 150W. This makes it suitable for a variety of applications, such as battery charger systems, LED lighting systems, telecom applications, AC motor speed or heat control systems, and power conditioning for AC/DC, DC/AC and DC/DC converters.
The MI-J2K-IZ-F4 DC to DC converter uses switching technology to generate a regulated output voltage from an unregulated input voltage. The method of conversion is based on a full bridge rectifier circuit, where switching transistors are used to convert an alternating current signal into a direct current signal. In the MI-J2K-IZ-F4 converter, the transistors are driven by a Pulse Width Modulated (PWM) signal with the frequency determined by the converter’s internal oscillator. The PWM signal is then used to drive the regulation loop, which is responsible for controlling the output voltage of the DC to DC converter.
The regulation loop is also responsible for controlling the converter’s energy efficiency. The operation of the loop is dependent on the feedback voltage signal acquired from the output voltage of the converter. Depending on the configuration of the converter, the feedback voltage may be measured externally using a shunt resistor or it may be measured internally using a differential amplifier circuit. In either case, the feedback voltage signal is compared to a reference voltage which is used to generate the PWM signal.
The output voltage of the converter is regulated by adjusting the duty-cycle of the PWM signal. A high duty-cycle results in a higher output voltage, while a low duty-cycle results in a lower output voltage. This process of adjusting the duty-cycle to maintain a regulated output voltage is called voltage regulation. The voltage regulation of the MI-J2K-IZ-F4 DC to DC converter is designed to be stable and efficient, resulting in improved power efficiency and reliability.
The MI-J2K-IZ-F4 DC to DC converter is also designed with several safety features which reduce the risks of over current, output short circuit, input overvoltage and thermal shut down. These features provide additional protection for the converter and the system it is powering. In addition, the converter is also designed with a continuous output short circuit protection (OCP) and an input overvoltage protection (OVP) to provide a safe and reliable power supply.
In conclusion, the MI-J2K-IZ-F4 DC to DC converter is a reliable, efficient and safe solution for a variety of applications. It is designed with a full bridge rectifier circuit, Pulse Width Modulated signal, and voltage regulation to provide a regulated output voltage. In addition, it also has a variety of built-in safety features to ensure reliable operation and protection for the system. As such, the MI-J2K-IZ-F4 DC to DC converter is an ideal solution for powering devices in various electronic systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...