Allicdata Part #: | MI-J2L-IZ-F4-ND |
Manufacturer Part#: |
MI-J2L-IZ-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 28V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 28V 89... |
DataSheet: | MI-J2L-IZ-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 893mA |
Size / Dimension: | 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm) |
Package / Case: | 9-DIP Module |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 25W |
Series: | MI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 28V |
Voltage - Input (Max): | 50V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electronic devices used to convert a direct current (DC) voltage from one level to another. They are commonly used to adjust voltages in electronic equipment such as laptops and electronics, or to provide just the right voltage for a particular electronic component such as a transistor or motor. The MI-J2L-IZ-F4 is a specific type of DC-DC converter that is designed to provide a high-performance, low-voltage and low-power solution for use in consumer, industrial and automotive applications.
Application Field
The MI-J2L-IZ-F4 is commonly used in consumer applications such as laptop and smartphone charging, as well as other electronics devices. It is also used in industrial applications such as aircraft power systems and industrial motor control. It is also used in automotive applications such as battery charging and fuel management systems.
Working Principle
The MI-J2L-IZ-F4 is based on a switching regulator topology, which works by rapidly alternating between charging and discharging cycles. During the charging cycle, the input is connected to the output, allowing current to flow. During the discharging cycle, the input is switched off so no current can flow. By controlling the length of each cycle and the magnitude of the input voltage, the output voltage can be controlled.
The MI-J2L-IZ-F4 also employs a current mode control method, which allows for a higher efficiency and faster output response time. This is accomplished by comparing the output current to an internally reference current, and then adjusting the switching duty cycle or frequency accordingly.
The MI-J2L-IZ-F4 is also designed to have low power consumption, as the chip has a low quiescent current draw, and is also capable of dynamic power management. This means that the converter will use only the power required to reach the output voltage, rather than wasting extra power.
Conclusion
The MI-J2L-IZ-F4 is a high-performance, low-voltage and low-power DC-DC converter that is designed for consumer, industrial and automotive applications. It utilizes a switching regulator topology and a current mode control method to produce output voltages that are more accurate and efficient than other DC-DC converters. Additionally, it also features low power consumption through its low quiescent current draw and dynamic power management.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...