Allicdata Part #: | MI-J2M-MY-F4-ND |
Manufacturer Part#: |
MI-J2M-MY-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 10V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 10V 5A... |
DataSheet: | MI-J2M-MY-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 5A |
Size / Dimension: | 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm) |
Package / Case: | 9-DIP Module |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | MI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 10V |
Voltage - Input (Max): | 50V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters, also known as switch-mode power supplies, regulate and convert an incoming DC voltage to a different voltage for use in a variety of applications. MI-J2M-MY-F4 is a type of DC-DC converter. It can supply an output voltage range from 5V to 32V with a maximum output current of 25A and an efficiency of up to 95%. This makes it suitable for a wide range of applications where reliable power is required.
The MI-J2M-MY-F4 operates using a buck topology. In a buck configuration, the input voltage is converted to a lower voltage at the output stage. It works by switching an N-channel MOSFET on and off at a high frequency, allowing it to regulate the output voltage. This is done using a feedback loop, where the converted voltage is compared with a reference voltage and a Pulse Width Modulated (PWM) signal is generated to control the MOSFET.
The MI-J2M-MY-F4 has a wide range of features that make it ideal for many different applications. It has a built-in Safety Shut Down function which will shut down the converter in the event of an overcurrent or overtemperature. It also has a low ripple voltage under 300mV, which is important for ensuring stable operation of sensitive electronic components. Additionally, it has an overvoltage protection circuit and a soft start function.
The MI-J2M-MY-F4 is suitable for a wide range of applications such as LED lighting, industrial control, and instrumentation. It can also be used for automotive applications such as vehicle battery charging and motor control. Additionally, it is well suited for renewable energy applications such as wind and solar power.
In summary, the MI-J2M-MY-F4 is a high-performance DC-DC converter that is suitable for a wide range of applications. It features high efficiency, low ripple voltage, and a variety of safety features. Its many features make it an ideal choice for powering a wide range of sensitive electronic components.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...