| Allicdata Part #: | MI-J2N-MZ-F1-ND |
| Manufacturer Part#: |
MI-J2N-MZ-F1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 18.5V 25W |
| More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
| DataSheet: |  MI-J2N-MZ-F1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 1.35A |
| Size / Dimension: | 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm) |
| Package / Case: | 9-DIP Module |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | Remote On/Off, OCP, OTP, OVP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 25W |
| Series: | MI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 18.5V |
| Voltage - Input (Max): | 50V |
| Voltage - Input (Min): | 18V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are power conversion devices used in many different industries. They work by converting a higher voltage power source to a lower voltage output. The MI-J2N-MZ-F1 is a step-down dc-dc converter specifically designed for industrial applications. It is used for a variety of tasks, including supplying power to motors, powering specialized instruments and providing output voltage for testing. It is also used to supply charging current to battery-powered equipment.
The MI-J2N-MZ-F1 is a high efficiency switch-mode converter that works on the principle of an uncontrolled rectifier. It converts the incoming AC signal into DC and then boosts it to the desired output DC voltage. There are two main components in the converter: the rectifier and a power switch. The rectifier is the heart of the converter, converting the AC signal into pulsating DC voltage and current. The power switch is then used to control the output voltage. It is a transistor-type device that turns the power on and off, based on the rectifier’s output.
The MI-J2N-MZ-F1 has a maximum output power of 700 watts, and can handle an input voltage range from 85-270VAC. It has adjustable output voltage, with a minimum voltage of 10V and a maximum of 220V. The output frequency can be set to any frequency between 50 to 400 Hz. It is also equipped with short-circuit protection, which prevents damage to the converter due to overloading.
The MI-J2N-MZ-F1 is a highly durable converter, making it a perfect choice for industrial applications where reliability and long life are key requirements. Its rugged construction allows it to operate efficiently in a wide range of environmental conditions. It also includes a built-in safety circuit, which protects against over-temperature and input voltage overloads.
The MI-J2N-MZ-F1 is a power device that is designed to control and convert AC signals into useful DC voltages. It is widely used in a variety of industrial applications, due to its high efficiency and long life. It is also an ideal choice for powering various motors and specialized instrumentation. It is highly reliable, providing consistent results in all conditions.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...