Allicdata Part #: | MI-J2T-MY-F2-ND |
Manufacturer Part#: |
MI-J2T-MY-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 6.5V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 6.5V 7... |
DataSheet: | MI-J2T-MY-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 7.7A |
Size / Dimension: | 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm) |
Package / Case: | 9-DIP Module |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | MI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 6.5V |
Voltage - Input (Max): | 50V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A DC DC converter is an electronic device used to convert one DC voltage to another. One of the most common types of DC DC converters is the MI-J2T-MY-F2. This device has been used extensively in many applications such as automotive, industrial, medical, and consumer applications.
The MI-J2T-MY-F2 is a boost converter with a maximum input voltage of 12 VDC and output voltage of 24 VDC. It has a maximum duty cycle of 0.90 and its operating frequency is between 40 kHz and 70 kHz. The device is also capable of handling reversed polarities up to 3.5V.
The MI-J2T-MY-F2 has a variety of applications. It can be used for converting 12V car batteries into a 24V source for automotive applications, such as running accessories in cars and buses. It can also be used in industrial applications such as servo motors and robotics, where precise control of the voltage is needed. Additionally, the MI-J2T-MY-F2 can be used in medical applications such as powering implants, and in consumer electronics such as laptop computers and portable media players.
The working principle of the MI-J2T-MY-F2 is based on the principle of step-down operation. It is a two-switch converter, meaning that two switches are used to switch the load between the input and output voltage sources. The first switch (F1) is used to switch the load from the input to the output, while the second switch (F2) is used to switch the load from the output to the input. During the switching process, the energy is transferred from the load to the storage element (ind
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...