| Allicdata Part #: | MI-J2W-MZ-F1-ND |
| Manufacturer Part#: |
MI-J2W-MZ-F1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 5.5V 25W |
| More Detail: | Isolated Module DC DC Converter 1 Output 5.5V 4... |
| DataSheet: |  MI-J2W-MZ-F1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 4.5A |
| Size / Dimension: | 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm) |
| Package / Case: | 9-DIP Module |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | Remote On/Off, OCP, OTP, OVP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 25W |
| Series: | MI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 5.5V |
| Voltage - Input (Max): | 50V |
| Voltage - Input (Min): | 18V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
。DC-DC converters are widely used to convert the voltage and current of a DC source, such as batteries, to another level of voltage and current. The MI-J2W-MZ-F1 is a type of DC-DC converter designed to provide an efficient means of translating low-voltage DC input to a high-voltage DC output. This converter is used for various applications such as powering automotive integrated circuits, battery powered instrumentation, mobile communications, and power management.
The MI-J2W-MZ-F1 is an isolated converter with a wide input voltage range of 4.5-14V and an output voltage range of 3 or 4.5 to 28V. It has excellent efficiency of up to 95%, low input current ripple, low output voltage ripple within 2%, and fast transient response. It also features over-current, over-voltage, and over-temperature protection. The converter requires no external components, making it a simple and very cost-effective solution.
The operation of a DC-DC converter such as the MI-J2W-MZ-F1 is based on the Switched Mode Power Supply (SMPS) technique. With SMPS, the power from the input is converted into a pulsed waveform of voltage or current at a much higher frequency. The transformer of the converter then steps this high frequency power up or down to match the required output voltage or current. This conversion process is far more efficient than linear regulators as it does not suffer from power loss due to heat.
The MI-J2W-MZ-F1 is a widely used DC-DC converter due to its high efficiency, small size, wide input voltage range, and low output voltage ripple. It is an ideal choice for applications ranging from portable electronics to automotive electronics, power management, and distributed power systems. The converter is also easy to use, reliable, cost-effective, and capable of providing very high power output. As such, it is an important part of any DC-DC conversion system.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...