Allicdata Part #: | MI-J2Z-IY-F2-ND |
Manufacturer Part#: |
MI-J2Z-IY-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 2V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 2V 10A... |
DataSheet: | MI-J2Z-IY-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 10A |
Size / Dimension: | 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm) |
Package / Case: | 9-DIP Module |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 25W |
Series: | MI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 2V |
Voltage - Input (Max): | 50V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electrical devices that convert direct current (DC) from one voltage level to another. The MI-J2Z-IY-F2 represents a new generation DC-DC converter designed for a variety of applications.
The MI-J2Z-IY-F2 is an isolated DC-DC converter with a wide input voltage range of 50V to 2000V and wide-output voltage range of 4.5V to 100V. It has a high efficiency of up to 92.5%. It is designed to deliver continuous power up to 50W with a peak power up to 200W. The MI-J2Z-IY-F2 has fast transient response time, precise input voltage regulation, and low output ripple. It also stands out for its high level of protection with over voltage, over temperature, over current, and short circuit protection.
The MI-J2Z-IY-F2 is a reliable solution for industrial, automotive, and medical applications, and operates in harsh environments with a wide operating temperature from -40℃ to +85℃. The BI-J2Z-IY-F2 is certified to EN55011 environmental standards and can be used in military and aerospace applications. Its high efficiency and low power dissipation make it suitable for a variety of energy systems, high-voltage distribution, and vehicle charging systems.
The MI-J2Z-IY-F2 relies on Buck topology, a switching power converter. The Buck converter consists of six components—an inductor, an input capacitor, an output capacitor, a switch, a diode, and an output resistor. It works by storing energy in an inductor as it is being switched. The stored energy is then released to the output of the converter via an output capacitor as the switch turns off. The diode prevents the current from flowing back into the converter. The output of the converter is regulated by a feedback circuit and an output resistor.
The MI-J2Z-IY-F2 can deliver consistent, reliable power to a wide variety of electronic systems with high efficiency, precise voltage regulation, fast transient response, and low output ripple. Its wide range of applications, high level of protection, and EN5511 certification make the MI-J2Z-IY-F2 a reliable solution for high-demanding applications, such as industrial, automotive, and medical applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...