| Allicdata Part #: | MI-J5J-IY-F3-ND |
| Manufacturer Part#: |
MI-J5J-IY-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 36V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 36V 1.... |
| DataSheet: |  MI-J5J-IY-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 1.4A |
| Size / Dimension: | 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm) |
| Package / Case: | 9-DIP Module |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | Remote On/Off, OCP, OTP, OVP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Series: | MI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 36V |
| Voltage - Input (Max): | 210V |
| Voltage - Input (Min): | 100V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are devices which convert one electrical DC voltage to another electrical DC voltage. The MI-J5J-IY-F3 is a high-efficiency, low-profile DC-DC converter. It is designed to suit applications requiring non-isolated, front-end supplies.
MI-J5J-IY-F3 applies a step-down topology, boosting a 4.5V to 14V DC input range to an output range of 1.0V to 5.0V. This high-efficiency device is rated up to 1A output current with ± 2.5% Vout and up to 91% efficiency. It also has a low-profile design of 6.2mm height which can easily fit in confined spaces with minimal airflow. This device also has short-circuit, over-current, and over-temperature protection features.
The MI-J5J-IY-F3 is a great choice for applications that require small package size and high performance. It is used in a variety of electronics such as automotive electronics, disk drives, motor drives, PDAs, digital imaging, and gaming systems. These include power solutions used in automotive applications such as light-emitting and optical sensors, driver assistance systems, infotainment, and wires and cables.
The MI-J5J-IY-F3 works on the principle of buck-boost conversion. In buck-boost conversion, an input source is connected in either buck or boost mode. The input source is connected in buck mode if the input voltage is higher than the output voltage. On the other hand, the input source is connected in boost mode if the input voltage is lower than the output voltage. This topology allows for a wide input range, making it an ideal choice for applications that require high levels of power and efficiency.
The MI-J5J-IY-F3 has a wide range of applications and features, making it a great choice for power solutions requiring both high efficiency and small size. Its high efficiency, low-profile design, and short-circuit, over-current, and over-temperature protection features make it a great solution for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...