| Allicdata Part #: | MI-J5V-MA-ND |
| Manufacturer Part#: |
MI-J5V-MA |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 5.8V 10W |
| More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 1... |
| DataSheet: |  MI-J5V-MA Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 1.7A |
| Size / Dimension: | 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm) |
| Package / Case: | 9-DIP Module |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | Remote On/Off, OCP, OTP, OVP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 10W |
| Series: | MI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 5.8V |
| Voltage - Input (Max): | 210V |
| Voltage - Input (Min): | 100V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electric power converters that convert a source of direct current (DC) from one voltage level to another. MI-J5V-MA is an advanced high-frequency DC-DC step down voltage converter with plus/minus differential input, adjustable output voltage, with a choice of input voltages from 1.8V to 5.5V. This device can convert a high high-frequency DC voltage pulses to a lower level DC voltage.
The operating principle of the MI-J5V-MA is to convert a high-frequency DC voltage pulse into a lower DC output voltage. The input voltage is converted to a high-frequency pulse width modulation (PWM) rectangle waveform whose duty factor is adjustable, and this waveform is then filtered into a low-ripple DC output voltage. The on-chip over-temperature protection circuit can shut down the device when the junction temperature reaches approximately 150℃, thus avoiding any further thermal damage.
MI-J5V-MA applications include on-board telecom systems, consumer electronics, transportation vehicles, and automation systems. It can be used to provide power for digital circuit, such as CPUs, DSPs, and microcontrollers. Its adjustable output voltage, high efficiency, and high-frequency operation make it particularly well-suited for applications where efficient power conversion over a wide range of current and voltage levels is required.
MI-J5V-MA is widely used in modern DC-DC power conversion applications due to its advanced high-frequency conversion technology and features such as adjustable output voltage, high efficiency, and over-temperature protection. These features result in improved system reliability and performance, and enable designers to achieve higher-efficiency and better-performance solutions.
In summary, the MI-J5V-MA is a high-frequency DC-DC step down voltage converter featuring plus/minus differential input, adjustable output voltage, high efficiency, and on-chip over-temperature protection. It is widely used in modern DC-DC power conversion applications due to its advanced high-frequency conversion technology and features such as adjustable output voltage, high efficiency, and over-temperature protection.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...