MI-J5X-MZ-S

Current - Output (Max):	4.8A
Size / Dimension:	2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm)
Package / Case:	9-DIP Module
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 85°C
Features:	Remote On/Off, OCP, OTP, OVP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	25W
Series:	MI-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5.2V
Voltage - Input (Max):	210V
Voltage - Input (Min):	100V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are electrical circuits used to transform the voltage of one type of direct current (DC) voltage level to another type of DC voltage level. The most commonly encountered DC/DC converters employed in modern applications are called switched-mode converters (SMCs).The MI-J5X-MZ-S is a high efficiency, single-output, synchronous switching DC-DC converter package developed for a variety of applications in the telecommunication and industrial sectors including:

• Telecommunication base stations
• Wireless communication equipment
• Motor-driven systems
• Grid-tied inverter systems
• Engine management systems
• Power supply solutions for specialized loads

The MI-J5X-MZ-S is capable of delivering an output voltage range of 6V to 13.7V DC and currents up to 60A with efficiencies up to 96%. The device employs Synchronous Rectification techniques and the latest in silicon technology to achieve high efficiency over the entire output voltage range.The MI-J5X-MZ-S utilizes a switch-mode architecture called a buck regulator. A buck regulator consists of four main components, a power switch, a rectifier, a transformer, and a control circuit. The Power Switch is an electronic switch with a low on-resistance that is used to control the current flow through the inductor. The switch is controlled by the control circuit, which turns the switch either on or off depending on the output voltage level. The Rectifier is a diode bridge that is used to rectify the alternating current produced by the transformer. The Transformer is used to transform the DC voltage level to either a higher or lower DC voltage level. The transformer is composed of a winding on the primary side and a winding on the secondary side that is connected to the output voltage. The Control Circuit is an electronic circuit that controls the operation of the power switch. The control circuit monitors the output voltage level and adjust the switching frequency of the power switch accordingly. The MI-J5X-MZ-S synchronous buck regulator also utilizes a control technique called Pulse Width Modulation (PWM). PWM is a process that modulates the power switch duty cycle to regulate the amount of energy transferred to the output voltage. By varying the duty cycle of the power switch, the control circuit can regulate the output voltage. Finally, the MI-J5X-MZ-S synchronous buck regulator also utilizes a feature called "protective features" to ensure a robust high reliability product. These protective features provide a variety of safeguards to protect the device\'s components from damage and prevent unexpected operation.The MI-J5X-MZ-S is a highly efficient, cost effective, synchronous buck regulator that is suited for a wide variety of applications in the telecommunication and industrial sectors such as base stations, wireless communication equipment, motor-driven systems, and power supply solutions for specialized loads. The device utilizes a variety of techniques and features to provide high efficiency, excellent regulation, and robust reliability.

The specific data is subject to PDF, and the above content is for reference