Allicdata Part #: | MI-J5Z-IZ-ND |
Manufacturer Part#: |
MI-J5Z-IZ |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 2V 10W |
More Detail: | Isolated Module DC DC Converter 1 Output 2V 5A ... |
DataSheet: | MI-J5Z-IZ Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 5A |
Size / Dimension: | 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm) |
Package / Case: | 9-DIP Module |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 10W |
Series: | MI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 2V |
Voltage - Input (Max): | 210V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
This page focuses on the MI-J5Z-IZ DC DC Converter (hereinafter referred to as the "converter"). The article will cover its application field and working principle.
The MI-J5Z-IZ converter is a DC-DC converter designed to efficiently convert high voltage DC power from its input to a lower voltage DC power, suitable for many consumer electronics devices such as mobile phones. This converter is designed using two high speed power MOSFETs to improve operating efficiency.
In terms of applications, the MI-J5Z-IZ converter is most often employed to step-down a 12V DC input to a regulated 5V DC output. It can also be used to step-down 12V DC input to a regulated 3.3V DC output, making it an ideal choice for powering mobile phones and other consumer electronics. The MI-J5Z-IZ converter is a very useful tool if you need to power low voltage DC devices from a single 12V DC source.
In terms of its working principle, the MI-J5Z-IZ converter uses two high speed power MOSFETs in series, forming a synchronous rectifier. It has a wide input voltage range and can operate up to 100kHz. When the 12V DC input is applied, a fixed on-time pulse width modulation (PWM) signal is generated by the MCU. The PWM signal is then passed through the two MOSFETs, which synchronously convert the input voltage to a lower output voltage (either 3.3V or 5V).
The MI-J5Z-IZ converter is also designed with various safety features to protect against over-current, over-voltage, over-temperature, reverse voltage, and short circuits. The overall efficiency of this converter is typically up to 95% depending on the input voltage, output voltage, and load.
In summary, the MI-J5Z-IZ DC DC converter is a versatile and efficient tool for converting high voltage DC power to a much lower voltage suitable for powering most consumer electronics devices. It utilizes two high speed power MOSFETs in series to efficiently step-down input voltage while providing protective features against over-current, over-voltage, over-temperature, reverse voltage, and short circuits. This converter is also easy to use, making it an ideal choice for powering low voltage DC devices with just a single 12V DC source.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...