| Allicdata Part #: | MI-J6P-MZ-F1-ND |
| Manufacturer Part#: |
MI-J6P-MZ-F1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 13.8V 25W |
| More Detail: | Isolated Module DC DC Converter 1 Output 13.8V ... |
| DataSheet: |  MI-J6P-MZ-F1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 1.8A |
| Size / Dimension: | 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm) |
| Package / Case: | 9-DIP Module |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | Remote On/Off, OCP, OTP, OVP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 25W |
| Series: | MI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 13.8V |
| Voltage - Input (Max): | 400V |
| Voltage - Input (Min): | 125V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are an important type of power converters that are used to cover a wide range of applications. The MI-J6P-MZ-F1 is a type of DC-DC converter that can be used to convert a DC voltage from one value to another. This type of converter is ideal for applications where a wide range of DC voltages are needed.
The MI-J6P-MZ-F1 converter is a miniaturized, low-power DC-DC converter. It is designed to provide a DC output voltage that is adjustable from 0.95 V up to 30.5 V, with a maximum output current of 2.5 A. The input voltage range is 4.5-32 V, making it ideal for many types of industrial, automotive, and solar applications.
The MI-J6P-MZ-F1 converter is based on a step-down (buck) switching topology, with a pseudo-current-mode control scheme. The input voltage is stepped down using a switching transistor. When the transistor is turned ON, it draws current from the input, storing energy in an inductor. When the transistor is turned OFF, the stored energy is released and changes the output voltage.
The switching period and duty cycle are adjusted by the feedback loop, which monitors and regulates the output voltage. This is done by measuring the output voltage and comparing it to a reference voltage. If the output voltage is higher than the reference, the duty cycle is decreased, while if it is lower, the duty cycle is increased. This adjustment is done in real-time, providing fast and efficient regulation of the output voltage.
The MI-J6P-MZ-F1 converter also offers a number of protection features that protect against input under-voltage, output over-voltage, over-temperature, and output short-circuit. All of these features are essential in providing a safe and reliable power source for the application.
The MI-J6P-MZ-F1 converter is an ideal choice for a wide range of applications that require a DC voltage to be converted from one value to another, ranging from industrial, automotive, and solar applications to power supplies, battery charging, and motor control. Its low-power design, protection features, and adjustable voltage make it an ideal choice for these applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...