MI-J6W-IZ

Current - Output (Max):	4.5A
Size / Dimension:	2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm)
Package / Case:	9-DIP Module
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-40°C ~ 85°C
Features:	Remote On/Off, OCP, OTP, OVP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	25W
Series:	MI-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5.5V
Voltage - Input (Max):	400V
Voltage - Input (Min):	125V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to DC DC ConvertersDC-DC converters are a type of electronic power supply that converts direct current (DC) electrical power from one voltage level to another voltage level. These converters are mainly used in portable electronic devices and other systems that require low-voltage electrical power. DC-DC converters are also known as switching power supplies, voltage regulators, or DC-DC regulators.MI-J6W-IZ Application Field and Working PrincipleThe MI-J6W-IZ is a full-featured, high efficiency DC-DC converter designed specifically for applications in the communications, industrial control, and computing industries. This DC-DC converter is equipped with a wide range of features, such as power factor correction (PFC), input transient protection, active-clamping reset protection, short-circuit protection, over-voltage protection, and over-temperature protection.The MI-J6W-IZ supports a wide operating temperature range of -40°C to 85°C and a wide input voltage range of 4.5V to 24V. It is capable of converting an input voltage into two different output voltages with an output power ranging from 10W to 200W. The converter is also efficient in terms of energy consumption. Its efficiency ranges from 88% to 96%, depending on the input voltage and the output current.The MI-J6W-IZ works by converting direct current power from one voltage level to another. This is achieved through a series of steps, which include rectifying the input voltage, regulating the rectified voltage, and regulating the output voltage. The rectified voltage is then used to pulse width modulate (PWM) an isolated transformer, creating an alternating current (AC) which is converted back to direct current (DC) by a full wave rectifier. This creates the desired output voltage.The MI-J6W-IZ also features state-of-the-art power factor correction (PFC) circuitry, which helps to reduce input power harmonic distortion, thus increasing power efficiency and increasing the life of attached devices. This PFC circuitry also helps to meet the stringent power factor requirements of current standards.The MI-J6W-IZ also features a dual-loop control circuit. This dual-loop control circuit helps to maintain both the input/output voltage and the load/output current by continuously monitoring the actual voltage and current levels, and compensating for any discrepancies.ConclusionDC-DC converters are a type of electronic power supply that convert direct current (DC) electrical power from one voltage level to another voltage level. The MI-J6W-IZ is a high-efficiency DC-DC converter designed specifically for applications in the communications, industrial control, and computing industries. It supports a wide operating temperature range and a wide input voltage range while providing efficient energy conversion. The converter also features power factor correction (PFC) circuitry, enabling it to reduce harmonic distortion and increase efficiency and device life. Finally, this DC-DC converter includes a dual-loop control circuit, helping to maintain both the input/output voltage and the load/output current.

The specific data is subject to PDF, and the above content is for reference