Allicdata Part #: | MI-J7Z-IY-F2-ND |
Manufacturer Part#: |
MI-J7Z-IY-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 2V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 2V 10A... |
DataSheet: | MI-J7Z-IY-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 10A |
Size / Dimension: | 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm) |
Package / Case: | 9-DIP Module |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 25W |
Series: | MI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 2V |
Voltage - Input (Max): | 310V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are the workhorses of modern power conversion circuits. Their ability to regulate voltages and currents, as well as provide current limiting, can make them essential for specific applications. The MI-J7Z-IY-F2 is a type of DC-DC converter that is used for a variety of power requirements. This article outlines the application field and working principle of the MI-J7Z-IY-F2.
The MI-J7Z-IY-F2 is a low-power, high-efficiency DC-DC converter, designed for applications ranging from simple LED light drivers to multi-phase motor drive systems. It is a DC-DC boost converter based on a full H-bridge gate driver architecture with low voltage input and high side outputs. The high-side outputs consist of two floating secondary outputs, which are ideal for driving MOSFETs or IGBTs. The MI-J7Z-IY-F2 can be used in applications where a single DC input is required, such as solar and wind power applications, automotive and marine applications, medical, military and communications systems, and industrial equipment and consumer electronics.
In terms of working principle, the MI-J7Z-IY-F2 is based on a full H-bridge gate driver design. The H-bridge gate driver is a special type of switch that is used to control large currents on both the input and output. The MI-J7Z-IY-F2 contains two sub-stages: primary and secondary. The primary stage is driven by two MOSFETs, connected in series. The primary stage is used to efficiently transfer energy from the input source to the secondary stage. The secondary stage is used to adjust the output voltage and current. The MI-J7Z-IY-F2 also contains a control circuit that monitors the input and output voltages and current and adjusts the gate voltage accordingly.
The MI-J7Z-IY-F2 has an operating range of 4.5 to 45V for the input, and 0 to 50V for the output. The converter can also operate at up to 100kHz switching frequency, allowing for high efficiency and low EMI. The converter is designed for up to 15W of power, with peak power levels of 30W during transient conditions. In addition, the MI-J7Z-IY-F2 has built-in protection features for over-voltage, over-peak current and short-circuit protection.
The MI-J7Z-IY-F2 is capable of providing high performance and efficiency for a wide range of applications. It is an ideal choice for applications that require reliable, efficient and compact DC-DC conversion. The converter’s low voltage input, high voltage output, low EMI, integrated protections and high efficiency make it an attractive choice for many applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...