| Allicdata Part #: | MI-J7Z-IZ-F1-ND |
| Manufacturer Part#: |
MI-J7Z-IZ-F1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 2V 10W |
| More Detail: | Isolated Module DC DC Converter 1 Output 2V 5A ... |
| DataSheet: |  MI-J7Z-IZ-F1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 5A |
| Size / Dimension: | 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm) |
| Package / Case: | 9-DIP Module |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | Remote On/Off, OCP, OTP, OVP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 10W |
| Series: | MI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 2V |
| Voltage - Input (Max): | 310V |
| Voltage - Input (Min): | 100V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are widely used in industrial and domestic applications. A DC-DC converter is a device that is used to convert direct current (DC) power from one voltage to another. One of the most popular DC-DC converters is the MI-J7Z-IZ-F1.
The MI-J7Z-IZ-F1 is a switching DC-DC converter, with a wide input voltage range of 4.5-30 VDC and an output voltage range of 0.90-13.20 VDC. It offers a maximum output power of 5 watts and a maximum efficiency of 85%. Its features include short-circuit protection, over-voltage protection, over current protection, thermal protection, and reverse polarity protection.
The MI-J7Z-IZ-F1 is mainly used in applications such as distributed power supply systems, power grids, industrial control, metering systems, medical equipment, LED lighting, communication systems, and battery cell charging systems. It is also suitable for powering small electronic devices, such as cell phones, tablets, music players, portable devices, and consumer electronics.
The working principle of the MI-J7Z-IZ-F1 is based on the switched current (PFM) control method. This type of control method uses pulse width modulation (PWM) to vary the amount of energy provided to the load. When the load current increases, the duty cycle of the pulses is increased, resulting in more energy being delivered to the load. When the load current decreases, the duty cycle is decreased, reducing the energy being delivered to the load. The resulting energy-saving effect enables the MI-J7Z-IZ-F1 to provide high efficiency power conversion.
The MI-J7Z-IZ-F1 is an efficient and cost effective DC-DC converter that is suitable for use in a variety of applications. Its wide input voltage range and high efficiency make it a versatile solution that can be used in both residential and industrial applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...