MIC2004-1.2YM5-TR

Voltage - Supply (Vcc/Vdd):	Not Required
Base Part Number:	MIC2004
Supplier Device Package:	SOT-23-5
Package / Case:	SC-74A, SOT-753
Operating Temperature:	-40°C ~ 85°C (TA)
Fault Protection:	Current Limiting (Fixed), Over Temperature
Features:	Load Discharge
Input Type:	Non-Inverting
Rds On (Typ):	70 mOhm
Current - Output (Max):	1.2A
Series:	--
Voltage - Load:	2.5 V ~ 5.5 V
Interface:	On/Off
Output Type:	P-Channel
Output Configuration:	High Side
Ratio - Input:Output:	1:1
Number of Outputs:	1
Switch Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

• Introduction of Power Management Integrated Circuits (PMIC)

Power Management Integrated Circuits (PMICs) are integrated circuits used to control and manage the supply of power to electronic devices and systems. They are also known as power systems on a chip (PSoC). It is a type of integrated circuit (IC) that contains multiple connected circuits such as voltage regulators, load drivers, power switches and transistors to regulate the power supply to a device. PMICs are often used to design power systems for a variety of mobile, computer, and IoT applications.PMICs are one of the most critical components in any power system design, as they often have to make accurate decisions about whether or not to supply or switch between sources of power in order to maintain the proper levels of voltage and current. PMICs also have to account for different types of power sources, such as AC or DC power, solar power or battery power, or multiple sources at the same time. They are also used to monitor the power levels in the system and adjust them accordingly, as well as other features such as fault protection, low-power modes, sleep states, and thermal control.

• Tracing the Application Field and Working Principle of MIC2004-1.2YM5-TR

MIC2004-1.2YM5-TR is a general-purpose, ultra-low-power, synchronous power switch. It is primarily used to control and distribute power in applications where power efficiency and/or peak current requirements exceed the available capabilities of other devices. It is ideal for applications such as LED and LCD backlight drivers, point-of-listeners, portable medical devices, etc.The MIC2004-1.2YM5-TR is available in 4-pin SOT-23 and 5-pin DFN packages. It features a power-ON control pin (SHDN) and a switching frequency control pin (FRC) that can be used to select either the internal or an external clock frequency. The device is designed to operate from 2.7V to 5.5V and can handle input voltages up to 17V. It also features an internal voltage regulator, low power shutdown mode, over-current protection, and a thermal shutdown protection.The MIC2004-1.2YM5-TR offers a typical conversion efficiency of 80%. It includes an internal clock oscillator, allowing it to run at the PIN programmed switching frequency, and is capable of switching up to a 1.2A current with a start-up time of 80mA. It also includes a built-in high-side driver with a current-limit circuit that can reduce the inrush current. When the SHDN pin is pulled low, the device enters the low power shutdown mode where the switch circuit is completely disabled. When high, the device will be enabled and begin to switch at the programmed switching frequency (typically 1.5MHz). The FRC pin is used to select either the internal or an external clock for the device; when set high it will use the external clock and when set low it will use the internal clock. The MIC2004-1.2YM5-TR is a versatile power switch, providing very low current consumption and high capability to handle peak currents. It is highly suited for a wide range of applications, from LED and LCD backlighting, to portable medical devices, point-of-listeners, etc. It offers a high efficiency of up to 80%, and an internal regulator that makes it ideal for low voltage and power sensitive applications.

• Conclusion

In conclusion, the MIC2004-1.2YM5-TR is a versatile, low power, synchronous power switch. It offers very low current consumption and high peak current capability, making it ideal for applications such as LED and LCD backlighting, portable medical devices, point-of-listeners, etc. It is designed to operate from 2.7V to 5.5V and can handle input voltages up to 17V. It also includes an internal regulator, low power shutdown mode, over-current protection, and a thermal shutdown protection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description