MIC2005-0.5YM6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MIC2005-0.5YM6 is a high performance, low stand-by power, analog load switch from Micrel, Inc. It is part of the PMIC (Power Management Integrated Circuit) family and is a power distribution switch, load driver, and other components. It is used for data and power switching for high-current loads.

The MIC2005-0.5YM6 is suitable for applications that require high-impedance power switching with minimal power dissipation while maintaining a low stand-by power. It is designed to work with 3.0V to 5.5V operating voltage and can withstand a current up to 0.5A. The device can be controlled via an EN (enable) pin or via an I2C interface. It can also be configured in a current-limited mode to provide safer switching of high power loads.

The MIC2005-0.5YM6 has a typical drop out voltage of 100mV at 0.5A, making it suitable for applications where low power dissipation is required. This device has a low quiescent current of 14uA at 3V, making it one of the most efficient, low power switches available. In addition, the device has a wide temperature range of -40°C to +85°C, and is available in SOT23-5 and WFBGA8 packages making it suitable for a wide variety of applications.

The MIC2005-0.5YM6 has built-in over current and thermal protection and is rated for continuous operation of up to 6.0A, making it suitable for high current switching applications. It also provides protection against reverse current and over-voltage, making it suitable for automotive and industrial applications. In addition, the device has a high switching speed of 350ns, making it ideal for high speed data and power switching applications.

The MIC2005-0.5YM6 works in two main modes, active and disabled. The active mode is enabled when the EN pin is driven low and the device is capable of switching 0.5A of current. The disabled mode is enabled when the EN pin is driven high, or when a signal is received via the I2C interface, disabling the device from conducting current.

In summary, the MIC2005-0.5YM6 is an efficient, low stand-by power switch from Micrel Inc. that is suitable for high-impedance power switching and data switching applications with minimal power dissipation. It is rated for continuous operation of up to 6.0A, has a low quiescent current of 14uA, and is available in SOT23-5 and WFBGA8 packages. The device has built-in over current and thermal protection, protection against reverse current and over-voltage, and a high switching speed of 350ns, making it ideal for automotive and industrial applications.

The specific data is subject to PDF, and the above content is for reference