MIC26901YJL-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MIC26901YJL-TR is a switching regulator, a type of DC-DC conversion device, that is specifically designed for device applications that require optimal efficiency, minimal components and low-noise operation. The device may also be used in energy-saving applications, in systems with limited space, rapid transient responses, high efficiency, and low voltage ripple. The MIC26901YJL-TR switching regulator contains an integrated circuit (IC) and some external components. The IC is based on the charge-mode control principle, and its main components include an active power switch, an error amplifier, comparators, an on-chip oscillator, and a logic circuitry.

The MIC26901YJL-TR has a fixed switch frequency of 180 kHz. This switch frequency can be adjusted by an external gate input, provided the operating frequency remains above 120 kHz. The device offers a wide input voltage range, starting from a minimum of 6 V and going up to a maximum of 42 V. The output current of this regulator can go up to 3.2 A. This switching regulator can be used to generate adjustable output voltage as well as constant voltage mode. If a constant voltage output is required, the INPUT pin can be tied to GND, and the MIC26901YJL-TR will operate in constant voltage mode.

In terms of the working principle, the switching regulator utilizes an oscillator frequency that allows the MIC26901YJL-TR to switch between active and inactive states. This oscillator has an output voltage that is inversely proportional to its load current. As the load current increases, the output voltage decreases. The comparators detect the output voltage and it turns off the power switch when the output voltage exceeds the reference voltage. When the output voltage drops below the reference voltage, the power switch is turned on and the cycle repeats, allowing the MIC26901YJL-TR to stabilize the output voltage.

The MIC26901YJL-TR is ideal for many wide and demanding applications including portable or low-power devices, automotive systems and industrial automation. It is best used in current-limited applications and where the utilization of external components is kept to a minimum. Its low ripple, high efficiency, and optimal space utilization make it ideal for situations where noise control is essential.

Given its wide range of applications, the MIC26901YJL-TR can be used in all sorts of applications, ranging from portable gadgets and automotive systems to industrial automation. Its simple, cost-effective design makes it appropriate for a range of projects, from small charge controllers and DC-DC converters to power supplies for embedded systems and communication networks.

Combining results from actual measured values and simulations, the MIC26901YJL-TR achieves a maximum output current of 3.2 A, an output voltage range of 0.6 V-6 V, an output ripple of 0.3% and an efficiency greater than 95%. It also has an input voltage range from 6 V to 42 V. The integrated IC contains error amplifiers, oscillators, comparators, and logic circuitry to provide accurate and precise output voltage control.

In conclusion, the MIC26901YJL-TR is a DC-DC switching regulator that offers excellent performance characteristics, wide operating range and low external component count. It is suitable for a wide range of applications including automotive systems and industrial automation. Its adjustable output voltage, high efficiency and low noise make it an ideal choice for any project requiring precise output voltage control.

The specific data is subject to PDF, and the above content is for reference