MKP383339250JKM2T0

Operating Temperature:	-55°C ~ 105°C
Features:	--
Ratings:	--
Applications:	High Pulse, DV/DT
Lead Spacing:	1.083" (27.50mm)
Termination:	PC Pins
Height - Seated (Max):	0.984" (25.00mm)
Size / Dimension:	1.240" L x 0.591" W (31.50mm x 15.00mm)
Package / Case:	Radial
Mounting Type:	Through Hole
Series:	MMKP383
Dielectric Material:	Polypropylene (PP), Metallized
Voltage Rating - DC:	2500V (2.5kV)
Voltage Rating - AC:	900V
Tolerance:	±5%
Capacitance:	0.039µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Film capacitors are widely used in electronic applications due to their high reliability, low inductance capacitance and low losses. The MKP383339250JKM2T0 is a type of film capacitor, which features a flexible plastic film, two metalized electrodes and a thin coat of epoxy in between.

Application Field

MKP383339250JKM2T0 film capacitors can be used in various electronic applications, such as frequency tuning, noise decoupling, AC filter, high frequency snubbers, and safety-critical circuits.In frequency tuning applications, the MKP383339250JKM2T0 film capacitor is used to regulate the frequency of radio signals or audio signals. The capacitor reduces the resonance frequency and increases the pass frequency of the signal, allowing for more consistent performance.In noise decoupling applications, the capacitor is used to reduce ground loop interference that can cause unwanted noise. The capacitor works by allowing the non-essential signals to pass through without being affected by the noise.In AC filter applications, the capacitor is used to reduce the power loss that occurs in alternating current circuits. The capacitor works by reducing the ripple in the current, resulting in smoother operation and better energy efficiency.For safety-critical circuits, the MKP383339250JKM2T0 film capacitor is often used to provide overvoltage protection and short-circuit protection. This is to ensure that in the event of an over-voltage or short-circuit, the circuit can shut down or switch off in a safe and controlled manner.

Working Principle

The working principle of the MKP383339250JKM2T0 film capacitor is relatively simple. When a voltage is applied to the capacitor, electrical charge will flow through the thin flexible plastic film and accumulate at the electrode surfaces. This electrical energy is stored in the capacitor, ready to be released when the voltage is reversed.This stored energy is then used to power the circuit, or provide protection against over-voltages, depending on the application. The flexible plastic film allows for a high capacitance value, and the small size of the capacitor makes it ideal for installation in tight spaces.The MKP383339250JKM2T0 film capacitor can also be used in thermistors and resistors to reduce noise and increase efficiency. This is especially useful in applications where high frequencies are used, as the capacitor will reduce the parasitic capacitive components that can cause interference.

Conclusion

In conclusion, the MKP383339250JKM2T0 film capacitor is a versatile electronic component that can be used in a variety of different applications. The capacitor offers high capacitance values, high reliability, and low inductance capacitance, allowing it to be used in frequency tuning, noise decoupling, AC filter, high frequency snubbers, and safety-critical circuits. The working principle of the capacitor is also very simple, making it an ideal choice for a variety of different applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description