MKP383391025JF02I0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A film capacitor, formally termed a plastic film capacitor, is a type of capacitor that uses a thin plastic film as the dielectric, or insulation layer, instead of the usual paper or ceramic materials. Common designs of film capacitors utilize polyester (Mylar), polypropylene, polyethylene terephthalate (PET or PETP), polyphenylene sulfide (PPS), polyphenylene oxide (PPO), polycarbonate (Lexan), and polysulfone (Udel). Metallized films are also used.

The MKP383391025JF02I0 is a specific type of film capacitor. It is a “miniature” type of film capacitor typically used for light commercial applications. It is most commonly found in lighting fixtures, ceiling fans, electrical tools, and other small power applications. It has a capacitance of 1025μF, a rated voltage of 450V, and a tolerance rating of 10%.

The working principle behind the MKP383391025JF02I0 is simple. It stores energy in the form of an electrical charge between two plates made of a conductive material. The plates are separated by a dielectric, in this case a thin plastic film. The electric charge stored is proportional to the area of the plates and their distance apart. When voltage is applied to the plates, current flows, thus causing charges of opposite polarity to accumulate on either side of the plates.

The MKP383391025JF02I0 is primarily used for a variety of low-to-medium voltage applications. It is a reliable and cost-effective solution for medium-duty applications, such as motor starting, circuit protection, signal filtering, and power factor correction. It can also be used to reduce peak voltages, decrease start-up surges, and reduce audible noise. Additionally, the MKP383391025JF02I0 can be used in a wide range of temperatures, ranging from -4°F (-20°C) to 158°F (70°C).

Overall, the MKP383391025JF02I0 film capacitor is a cost-effective and reliable choice for low-to-medium voltage applications. Its thin plastic film dielectric allows it to handle a wide range of temperatures and it is capable of storing sufficient energy for a wide range of applications. It is an ideal choice for light-duty commercial applications, such as motor starting, circuit protection, signal filtering, and power factor correction.

The specific data is subject to PDF, and the above content is for reference