MKP383418140JKP2T0

Film capacitors are a type of capacitor that uses a thin film of insulation material such as polyester, polycarbonate, or polypropylene to separate two conducting plates. These capacitors are used in a wide variety of applications, from automotive electronics to consumer electronics, and offer many advantages over other types of capacitors, such as better temperature stability, higher operating voltages and higher operating temperatures. The MKP383418140JKP2T0 is a specific type of film capacitor used in a variety of applications.

The MKP383418140JKP2T0 is a Polyester Metallized Class-X2 film capacitor that is specially designed to be used in safety approved devices, such as Class-X2 equipment. The capacitor is rated for a working voltage of 440V peak and a temperature coefficient of -40 Percent/°C. It has a 105°C rated temperature limit and has a maximum permissible ripple current rating of 2.4A. The MKP383418140JKP2T0 is available in two sizes: 10mm x 25mm and 15mm x 25mm.

The MKP383418140JKP2T0 is specifically designed for use in electrical and electronic equipment such as AC mains-powered equipment, electrical motors, electronic ballasts, relays and transformers, and gas-discharge lighting fixtures (High Intensity Discharge (HID) lamps). It is also suitable for use in applications that require higher operating temperatures, such as surge suppressors, automobiles, domestic appliances and air conditioning systems.

The primary advantage of the MKP383418140JKP2T0 film capacitor is that it has low dielectric absorption. This means that the capacitor can store a relatively large amount of electrical energy without losing energy due to the dielectric effect. This also means that the capacitor can hold a charge for a long period of time, without having to be constantly recharged.

The working principle of the MKP383418140JKP2T0 capacitor is based on the principles of capacitance. Capacitance is the ratio of the amount of electrical charge stored between two conducting plates, to the potential difference between them. When a voltage is applied across the nanofilm, the capacitor takes on a charge. This charge is retained until the potential difference between the two plates is reduced, at which point the charge is released. This process is repeated every time the voltage is changed.

In conclusion, the MKP383418140JKP2T0 is a polyester metallized X2 class capacitor that is specifically designed for use in a wide range of electrical and electronic applications. It offers excellent temperature stability and high ripple current ratings, making it an ideal choice for a variety of applications. With its low dielectric absorption rate, the MKP383418140JKP2T0 also offers a long life and reliable performance.