MKP385239100JCA2B0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors are a type of capacitor that uses a thin plastic film to act as the dielectric between two metal conductors. The dielectric material is usually polypropylene, polystyrene or Mylar. Film capacitors are designed to provide a high capacitance-to-volume ratio at moderate to high voltage ratings. With its low cost and high reliability, film capacitors can be used in a wide range of commercial and industrial applications.

The MKP385239100JCA2B0 is a polypropylene (PP) film capacitor with bipolar characteristics. It has a plastic body with two caps that are designed to prevent dirt and moisture. The capacitor is rated for 85°C, has an average capacitance of 100μF at 1KHz, and a rated voltage of 250VRMS.

The MKP385239100JCA2B0 has several different applications, including motor start, rectification, filters, signal coupling, and decoupling. Motor start capacitors are used in electric motors to store and release energy as the motor runs. Rectification capacitors are used in power supplies to prevent spikes and provide a low source impedance. Filters are used to reduce EMI noise and provide a stable power output. Signal coupling and decoupling capacitors are used to couple or isolate signals from each other and provide protection against oscillation. All of these applications require a film capacitor with high voltage and capacitance ratings.

The working principle of the MKP385239100JCA2B0 is relatively simple. When two metal conductors are placed near each other, an electric field is created. This electric field causes the dielectric material (in this case, polypropylene) to be polarized. This polarization of the dielectric material creates an electric charge between the conductors. As a result, a current can be transferred between the conductors. The amount of current that can be transferred is determined by the capacitance of the capacitor, which is in turn determined by its size and the type of dielectric material used.

In summary, the MKP385239100JCA2B0 is a polypropylene film capacitor with bipolar characteristics. It is rated for 85°C and has an average capacitance of 100μF at 1KHz, and a rated voltage of 250VRMS. The capacitor can be used in a variety of applications, such as motor start, rectification, filters, signal coupling, and decoupling. The working principle of the capacitor is based on the electric field created between two metal conductors and the polarization of the dielectric material. The amount of current that can be transferred is determined by the capacitance of the capacitor.

The specific data is subject to PDF, and the above content is for reference