MKP385268200JFI2B0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors were given their name due to the common use of polypropylene as the dielectric material. The MKP385268200JFI2B0 are no exception as they employ this popular material for their construction. This capacitor type falls under the PPM series of components. The PPM series of components are designed for high-temperature endurance and features a moisture resistant design due to the use of polypropylene film. This capacitor type is classified as a non-polar capacitor, meaning that it does not require an external series of connections when soldering onto a PCB module.

The MKP385268200JFI2B0 capacitors have an equivalent capacitance rating of 2.2 uF, a rated temperature range of 200C, and a voltage rating of 500V. The capacitors have a very low equivalent series resistance (ESR) rating; at 0.3ohm, meaning that they can handle very high frequency signals without significant voltage drop. These capacitors are often utilized in filters, surge suppressing, and signal line decoupling applications due to their low ESR ratings.

The working principle behind the MKP385268200JFI2B0 capacitors is the same as any other film-type capacitor. The capacitor consists of two metallic plates, often encased in a polypropylene dielectric, which are separated by a thin layer of air. When a voltage is applied, electrons flow from one plate to the other, creating an electrostatic field, which is known as capacitance. Capacitance is measured in Farads, and the MKP385268200JFI2B0 capacitors have a resonant frequency of 10KHz.

In addition to filter and surge suppression applications, the MKP385268200JFI2B0 capacitors can also be used as circuit protection components. The capacitors can be connected in parallel with a high value resistor to help lower the amount of current going through the circuit. The high rate of current, as well as any potential voltage spikes, can cause permanent damage to the circuit, so by using the MKP385268200JFI2B0 capacitors in parallel with a resistor, the amount of current going through the circuit is greatly reduced.

The MKP385268200JFI2B0 capacitors can be used in a variety of other applications, such as oscillators, RF amplifiers, and filters in radio communications and medical imaging equipment. In oscillators, the capacitors can help increase signal stability by providing a higher rate of resonance, which is necessary for radio communication applications. In RF amplifiers, the capacitors provide a stable source of power to the amplifier circuitry, as well as provide frequency filtering for consistent signal strength. Finally, the capacitors can be used for image stabilization in medical imaging equipment, as the capacitors provide a constant signal current, ensuring that the image produced is always of a high quality.

In conclusion, the MKP385268200JFI2B0 capacitors are a great choice for high-temperature applications due to their moisture resistant design. The capacitors have a low ESR rating, meaning that they can handle very high frequency signals without dropping in voltage, making them suitable for use in filters, surge suppression, and decoupling applications. The capacitors can also be used in oscillators, RF amplifiers, and image stabilization applications due to their stability and accuracy.

The specific data is subject to PDF, and the above content is for reference