MKP385312040JB02W0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors, also known as plastic dielectric capacitors, come in two main types: polyester and polypropylene. The MKP385312040JB02W0 capacitor is a type of film capacitor, specifically a polystyrene-film capacitor. Film capacitors are valued for their small size, high dielectric constant, and long life. Due to these desirable characteristics, they are often used in a wide range of applications such as power supplies, DC-DC conversion, lighting ballasts, as coupling and decoupling capacitors, and, in some cases, as part of a snubber circuit. They are also suitable for high-temperature automotive and industrial applications.

The MKP385312040JB02W0 capacitor operates using Faraday’s law of induction. This states that an electric field is produced between two conductors whenever there is a change in the amount of electric charge in the conductors. Applied to this particular film capacitor, this means that the voltage across the plates produces an electric field that is proportional to the amount of capacitance between them. The amount of capacitance is dependent upon the relative permittivity of the dielectric material between the plates, the area of the plates, and the distance between them.

The MKP385312040JB02W0 capacitor is constructed using an extruded polystyrene film as the dielectric between two metalized layers. This particular capacitor has an insulation system with a dielectric strength of 2800Vdc and a breakdown voltage of 1.6kV, much higher than the standard film capacitors at 250/500V ratings. It is rated at 10nF and is also rated for low losses, making it an ideal choice for inverter circuits and circuits operating at high frequencies.

The MKP385312040JB02W0 capacitor is typically designed for the following applications: switching power supplies, filter-line output filters, switch mode power supply converters, snubber circuits, inverter circuits, and high-frequency circuits. In addition, it is also ideal for use in applications requiring high temperature, as these capacitors have an operating temperature range of -40 to +170°C.

Once installed and connected in the circuit, the MKP385312040JB02W0 capacitor works to smooth out any ripple or other high-frequency noise that can cause interference with other devices. It does this by storing the energy of the ripple and then releasing it back into the circuit slowly over time, thus stabilizing the voltage levels. The stored energy can also be used to smooth out voltage variations caused by load changes in the circuit.

In addition to providing a stable voltage source for the circuit, film capacitors can also be used for filtering and protection. As previously mentioned, the high dielectric strength of the plastic dielectric material makes it well-suited for suppressing electrical noise and interference in order to protect sensitive electronic components. The capacitor can also be used to filter the signal, preventing unwanted frequency signals from entering into the circuitry.

Overall, due to its high temperature and low noise characteristics, the MKP385312040JB02W0 capacitor is an ideal choice for a wide range of applications. From protection and filtering to providing a stable voltage source, this capacitor is well-suited for use in a variety of circuits and is suitable for use in automotive and industrial environments.

The specific data is subject to PDF, and the above content is for reference