MKP385411025JCA2B0

Operating Temperature:	-55°C ~ 110°C
Features:	--
Ratings:	--
Applications:	DC Link, DC Filtering; High Frequency, Switching; High Pulse, DV/DT
Lead Spacing:	0.295" (7.50mm)
Termination:	PC Pins
Height - Seated (Max):	0.413" (10.50mm)
Size / Dimension:	0.394" L x 0.197" W (10.00mm x 5.00mm)
Package / Case:	Radial
Mounting Type:	Through Hole
Series:	MKP385
Dielectric Material:	Polypropylene (PP), Metallized
Voltage Rating - DC:	250V
Voltage Rating - AC:	160V
Tolerance:	±5%
Capacitance:	0.11µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film CapacitorsA film capacitor is a type of capacitor that uses a thin plastic film as a dielectric. It can be used to store electricity, filter signals, and act as a voltage divider in electronic circuits. The MKP385411025JCA2B0 is an example of film capacitor. Application FieldFilm capacitors can be used for a wide range of applications. They are suitable for high voltage AC or DC, are low loss, and have low ESR (equivalent series resistance). In addition, they are small in size and can be customized for specific applications. Common applications of film capacitors include:• Power factor correction• Converter applications• Automotive applications• Overvoltage protection• Switch mode power supplies (SMPS)• Pulse applications• Resonant converters• Motor starting applicationsWorking PrincipleFilm capacitors work on the same principle as other capacitors. When two conductors, such as plates, are separated by an insulating material, they create an electric field that stores electrical energy. This stored electrical energy is known as static electricity. The insulation material between the two conductors is known as the dielectric. In a film capacitor, the dielectric is a thin plastic film, which acts as an insulator between the two conductors. The conductor could be aluminum, copper, or even stainless steel. The plastic film used in a film capacitor could be polypropylene, polyester, polycarbonate, or even Teflon. The dielectric is usually about 0.5 μm to 3 μm thick. When AC voltage is applied across the film capacitor, the alternating electric field causes the material molecules to become polarized. This polarization increases the dielectric constant of the dielectric material, resulting in increased charge storage capacity. This charge storage capacity is referred to as the capacitance, and is measured in Farads. The working frequency of a film capacitor ranges from DC to a few hundred kHz, depending on the dielectric material and the construction of the capacitor. Film capacitors are usually used in applications where high voltage is required, such as motor starting applications or overvoltage protection. They have low loss, are low ESR, and can be customized for specific applications. In addition, film capacitors are small in size, which makes them ideal for applications where space is an issue.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description